Nhazi
Foto nkọwa
Nkọwapụta
| SPCNkọwapụta ala | |
| Nha | 1220*125 (48''x5.0'') // 1220*168 (48''x6.7'') // 910*125 (36''x5.0'') |
| Spc isi ọkpụrụkpụ | 4.5mm, 5mm, 5.5mm, 6mm |
| Ọkpụrụkpụ veneer | 0.6mm, 1mm |
| Mkpokọta ịdị arọ | 5mm, 5.5mm, 6mm, 6.5mm, 7mm |
| Veneer ọkwa | AB, ABC, ABCD |
| Ụdị veneer | Oak, TEak, cherry, walnut |
| Mechaa | Achịcha waya, Flat |
| Elu | UV mkpuchi: 5 uwe ime, 2 fifinishcoat |
| Pịa Sistemu | Unilin Pịa, dobe mkpọchi(I4F) |
| Ọgwụgwọ pụrụ iche | V-Groove, Soundproof Eva/IXPE |
| Usoro ntinye | Na-ese n'elu mmiri |
Nkwado n'ala SPC
IXPE nkwado
Nkwado Eva dị larịị
Ọdịdị dị n'elu dị
Ngwongwo ala arụpụtara nke ọma
Ebe a na-ehicha ọkụ waya
Njikọ nke Spc flooring
hardwood spc ala
Kedu ihe dị iche n'etiti 100% Virgin Spc Flooring na Recycled Spc Flooring?
Spc Flooring Waterproof Quality Test
Ndepụta nkwakọ ụlọ SPC
| SIZE | PCS/igbe | M2/igbe | Igbe / pallet | PALLET/20FT | M2/20FT |
| 910x125x5mm | 10 | 1.1375 | 94 | 20 | 2138.5 |
| 1220x125x5mm | 10 | 1.525 | 70 | 20 | 2135 |
| 1220x150x5mm | 10 | 1.83 | 58 | 20 | 2122.8 |
Uru
Nnwale mgbochi mkpocha ala SPC
Nnwale mgbochi ọkụ n'ala SPC
Nnwale mgbochi mmiri nke ala SPC
Ngwa
Blackbutt Spc Project Flooring na Australia – 1
Ihe atụpụtara n'ala Gum Spc na Australia - 2
Usoro nchekwa ala SPC
1 Ụlọ ọrụ
4 SPC Health Board
7 SPC Pịa Macking Machine
10 Ụlọ nkwakọba ihe
2 SPC Coextrusion igwe
Nnwale ogo 5 SPC
8 Igwe na-agbakwunye ụfụfụ
11 Na-ebu
Igwe UV 3
6 SPC Cutting Machine / ike>
9 Ụlọ nyocha
A. Wetuo Pịa Spc nwụnye n'ala
B. Unilin Pịa nwụnye Spc Flooring
Uzo esi etinye n'ala SPC
1. Nke mbụ, chọpụta otú ị chọrọ ka ala ala na-agba ọsọ.A na-ahụkarị maka ngwaahịa plank, ala ala na-agba ọsọ ogologo nke ụlọ ahụ.Enwere ike inwe ihe ndị ọzọ ebe ọ bụ na ọ bụ ihe masịrị.
2. Iji zere obosara plank dị warara ma ọ bụ ogologo osisi dị mkpụmkpụ n'akụkụ mgbidi/ọnụ ụzọ, ọ dị mkpa ime atụmatụ tupu oge eruo.N'iji obosara nke ọnụ ụlọ ahụ, gbakọọ mbadamba ole zuru ezu ga-adaba na mpaghara ahụ yana ole ohere fọdụrụ nke ga-adị mkpa iji kpuchie ya site na akụkụ akụkụ.Kewaa oghere nke fọdụrụ site na abụọ iji gbakọọ obosara nke planks akụkụ.Mee otu ihe ahụ n'ogologo.
3. Rịba ama na ahịrị mbụ nke planks adịghị mkpa ka a na-edozi ya n'obosara, ọ ga-adị mkpa ka ebipụ ire na-adịghị akwado ya ka akụkụ dị ọcha, nke siri ike dị n'akụkụ mgbidi ahụ.
4. Ekwesịrị idobe oghere mgbasawanye 8mm site na mgbidi n'oge ntinye.Nke a ga-enye ohere ohere oghere mgbasawanye eke na nkwekọrịta nke planks.
5. Ekwesịrị itinye planks site n'aka nri gaa n'aka ekpe.Site na akuku aka nri elu nke ime ụlọ ahụ, tinye plank mbụ n'ime ya ka e wee kpughee ma isi na akụkụ nke oghere.
6. Wụnye plank nke abụọ n'ahịrị nke mbụ site n'ịkụnye ire akụkụ dị mkpụmkpụ n'ime ogologo akụkụ ogologo nke plank mbụ.
7. Iji malite n'ahịrị nke abụọ, bee plank nke dị ma ọ dịkarịa ala 152.4mm dị mkpụmkpụ karịa nke mbụ site n'itinye ire akụkụ ogologo n'ime oghere nke plank n'ahịrị nke mbụ.
8. Wụnye plank nke abụọ n'ahịrị nke abụọ site na ịtinye ire akụkụ dị mkpụmkpụ n'ime ụzọ awụnyere mbụ plank ogologo akụkụ.
9. Hazie plank ahụ ka e debe ọnụ ọnụ ire dị mkpụmkpụ n'elu egbugbere ọnụ nke plank n'ahịrị nke mbụ.
10. N'iji ike dị nro na n'ogo ogo 20-30, gbanye ire dị n'akụkụ dị mkpirikpi n'ime oghere nke plank na-emechi site n'ife n'akụkụ ogologo akụkụ.Ị nwere ike ibuli plank ahụ n'aka nri ya ntakịrị iji kwe ka ịme ihe "sliding".
11. Enwere ike itinye planks fọdụrụ n'ime ụlọ ahụ site na iji otu usoro ahụ.Gbaa mbọ hụ na a na-edobe oghere mgbasawanye achọrọ megide akụkụ niile kwụ ọtọ (dịka mgbidi, ọnụ ụzọ, kabinet wdg).
12. Enwere ike iji mma gbutuo osisi ahụ n’ụzọ dị mfe, rie ya n’elu osisi ma were osisi abụọ mee ya.
Nrụpụta nrụnye ala ala Spc
| Njirimara | Nkọwapụta ule na nsonaazụ |
| Nha (na inch) | 1220*125 (48 ″ x5.0″) |
| Mkpokọta ịdị arọ | 6.5mm |
| Mgbakwunye / Nkwado | 1.5mm ma ọ bụ 2.0mm IXPE na Eva |
| Ọkpụrụkpụ veneer | 0.6mm, 1mm |
| Veneer ọkwa | AB, ABC, ABCD |
| Ụdị veneer | Oak, TEak, cherry, walnut |
| Nha na ndidi | ASTM F2055 - Na-agafe - +0.016 n'otu ụkwụ ahịrị |
| Ọkpụrụkpụ | ASTM F386 - Agafe - aha +0.005 in. |
| Mgbanwe | ASTM F137 - Na-agafe - ≤1.0 in., enweghị mgbawa ma ọ bụ nkwụsịtụ |
| Nkwụsi ike akụkụ | ASTM F2199 - Na-agafe - ≤ 0.024 in. kwa ụkwụ ahịrị |
| Ọnụnọ nke igwe dị arọ / enweghị | TS EN 71-3 C - Na-ezute nkọwapụta.(Lead, Antimony, Arsenic, Barium, Cadmium, Chromium, Mercury na Selenium). |
| Nguzogide Ọgbọ anwụrụ | EN ISO 9239-1 Nsonaazụ 9.1 (Critical Flux) |
| Nguzogide Ọgbọ anwụrụ ọkụ, Ọnọdụ anaghị ere ọkụ | EN ISO |
| Ịkụ ọkụ | ASTM E648- ọkwa 1 |
| Ntinye ihe fọdụrụ | ASTM F1914 - Ngafe - Nkezi erughị 8% |
| Oke ibu static | ASTM-F-970 gafere 1000psi |
| Ihe ndị chọrọ maka Wear Group pr | EN 660-1 Ọkpụrụkpụ Mbelata 0.30 |
| Nguzogide ntupu | ASTM D2047 - Na-agafe -> 0.6 mmiri, 0.6 kpọrọ nkụ |
| Iguzogide Ìhè | ASTM F1515 - Agafe - ∧E ≤ 8 |
| Iguzogide Okpomọkụ | ASTM F1514 - Agafe - ∧E ≤ 8 |
| Omume Eletriki (ESD) | EN 1815: 1997 2,0 kV mgbe a nwalere na 23 C+1 C |
| Igwe ọkụ n'okpuru ala | Kwesịrị ekwesị maka ịwụnye n'elu n'okpuru ikpo ọkụ. |
| Curling Mgbe ekpughere na okpomọkụ | EN 434 <2mm gafere |
| Ọdịnaya Vinyl emegharịrị | Ihe dị ka 40% |
| Nrụgharịgharị | Enwere ike ịmegharị ya |
| Akwụkwọ ikike ngwaahịa | Azụmahịa Afọ 10 & Ebe obibi afọ 15 |
| Asambodo Floorscore | Enyere asambodo mgbe a rịọrọ ya |
