Ebe achara achara siri ike

Nkọwa dị mkpirikpi:

1) Akụrụngwa: 100% Raw Bamboo
2) Agba: Strand kpara akpa
3) Nha: 1840*126*14mm/ 960*96*15mm
4) Ọdịnaya mmiri: 8%-12%
5) Formaldehyde ikuku: Ruo ọkọlọtọ E1 nke Europe
6) Agba: Treffert


Nkọwa ngwaahịa

Ngosipụta agba

Nwụnye

Ala achara nke Carbonized

Mkpado ngwaahịa

Ala Bamboo Carbonized

Carbonized-Bamboo-Floor

Kedu ihe bụ Horizontal Bamboo Floor?

Floor Bamboo Horizontal bụ ụdị ihe ịchọ mma ụlọ ọhụrụ.Ọ na-eji achara dị elu nke okike dị ka akụrụngwa.Mgbe ihe karịrị usoro 20 gasịrị, a na-ewepụ ihe ọṅụṅụ bamboo puree, nke a na-agbanye site na okpomọkụ dị elu na nrụgide dị elu, wee site na ọtụtụ agba agba, ma mesịa kpochaa site na ụzarị infrared..Ala achara na-eweta ikuku ndụ ndụ na nke ọhụrụ n'ahịa ihe owuwu ụlọ yana uru sitere n'okike yana ọtụtụ ihe mara mma mgbe emechara ya.Ala achara nwere udidi eke nke achara, nke dị ọhụrụ na nke mara mma, na-enye ndị mmadụ ịlaghachi n'okike, ọmarịcha na mmetụta a nụchara anụcha.O nwere ọtụtụ njirimara.Nke mbụ, ala achara na-eji bamboo kama osisi, nke nwere njirimara mbụ nke osisi.N'ime usoro nhazi achara, a na-eji gluu dị elu nke na-agbaso ụkpụrụ mba iji zere mmerụ ahụ nke formaldehyde na ihe ndị ọzọ na-emerụ ahụ mmadụ.N'iji akụrụngwa na teknụzụ dị elu, site na usoro 26 nke nhazi bamboo raw, ọ nwere ọmarịcha okike nke ala osisi raw na ịdịte aka nke taịlị ala seramiiki.

Horizontal Bamboo abụghị ngwaahịa ọhụrụ.Ọ pụtara na ngwụcha 1980 na China.Kemgbe 1998, teknụzụ nrụpụta ala achara etoola.N'oge ahụ, mmepụta bụ naanị 300,000 square mita.N'ihi na nkà na ụzụ n'oge ahụ dị mgbagwoju anya ma na-etozughị oke, iji ihe eji eme bamboo enweghị ngwọta dị mma maka nsogbu nke ogologo ndụ ogologo ndụ, mmiri na mgbochi nla, n'ihi ya, e nwebeghị ọganihu ma gbasaa ya.N'ụwa nke 21st, n'ihi ọganihu teknụzụ, ala achara abanyela n'ahịa ahụ nke ọma.

Nkà na ụzụ nhazi nke ala achara dị iche na nke ngwaahịa bamboo omenala.A na-eme ya bụ bamboo nke dị n'etiti ruo na elu, nke a na-esi na nhọrọ siri ike, ime ihe, ịcha ọcha, vulcanization, akpịrị ịkpọ nkụ, njikwa ụmụ ahụhụ, na nchebe corrosion.Ọ na-etolite site na elu okpomọkụ na elu mgbali thermosetting glued elu.Ala osisi siri ike dịtụ aka.O nwere uru na ọghọm ya.Ala achara na osisi anaghị eyi uwe, na-egbochi nrụgide, iru mmiri na-egbochi ọkụ.Njirimara anụ ahụ ya dị mma karịa ala osisi siri ike.Ike ike dị elu dị elu karịa ala osisi siri ike na ọnụ ọgụgụ nkwụsịtụ dị ala karịa ala osisi siri ike.Ya mere, ọ gaghị agbawa mgbe ịtọgbọ.Ọ dịghị agbagọ, ọ dịghị deformation na arching.Otú ọ dị, achara na ala osisi nwere ike dị elu na ike siri ike, na mmetụta ụkwụ adịghị mma dị ka ala osisi siri ike, na ọdịdị ahụ adịghị iche iche dị ka ụlọ osisi siri ike.Ọdịdị ya bụ udidi ngwo eke, agba mara mma, ma kwekọọ n'echiche ndị mmadụ nke ịlaghachi n'okike, nke ka mma ka ụlọ osisi mejupụtara.Ya mere, ọnụahịa ahụ dịkwa n'etiti ala osisi siri ike na ala osisi mejupụtara.

Nhazi

bamboo-flooring-contructure
bamboo-types

Ala achara eke

natural-bamboo-flooring

Ala achara nke Carbonized

Carbonized-Bamboo-Flooring

Ala achara nke Carbonized eke

natural-Carbonized-Bamboo-Floor

Uru ala achara

BAMBOO-FLOORING-ADVANTAGE

Foto nkọwa

18mm-Bamboo-Flooring
20mm-Bamboo-Flooring
15mm-Bamboo-Floor-Natural
Bamboo-Floor-Natural

Data nka nka n'ala achara

1) Akụrụngwa: 100% Raw Bamboo
2) Agba: Strand kpara akpa
3) Nha: 1840*126*14mm/ 960*96*15mm
4) Ọdịnaya mmiri: 8%-12%
5) Formaldehyde ikuku: Ruo ọkọlọtọ E1 nke Europe
6) Agba: Treffert
7) Gluo: Dynea
8) Ntughari: Matt, Semi gloss
9) Njikọ: Asụsụ & Groove (T&G) pịa;Unilin+dobe pịa
10) Ikike inye: 110,000m2 / ọnwa
11) Akwụkwọ: Asambodo CE , ISO 9001:2008, ISO 14001:2004
12) mbukota: Ihe nkiri plastik nwere igbe katọn
13) Oge nnyefe: N'ime ụbọchị 25 ka enwetara ego n'ihu

Pịa Sistemụ Dịnụ

A: T&G Pịa

1

T&G LOCK BAMBOO-Bamboo Florinig

2

Achara T&G -Bamboo Florinig

B: Drop (akụkụ dị mkpirikpi)+ Unilin pịa (akụkụ ogologo)

drop-Bamboo-Florinig

tinye Bamboo Florinig

unilin-Bamboo-Florinig

unilin Bamboo Florinig

Ndepụta ngwugwu ala bamboo

Ụdị Nha ngwugwu Enweghị pallet/20FCL Pallet/20FCL Nha Igbe GW NW
Bamboo nke Carbonized 1020*130*15mm 20pcs/ctn 660 ctn / 1750.32 sqm 10 plt, 52ctns/plt,520ctns/1379.04 sqms 1040*280*165 28kg 27kg
1020*130*17mm 18pcs/ctn 640 ctn / 1575.29 sqm 10 plt, 52ctns/plt,520ctns/1241.14 sqm 1040*280*165 28kg 27kg
960*96*15mm 27pcs/ctn 710 ctn / 1766.71 sqm 9 plt, 56ctns/plt,504ctns/1254.10 sqms 980*305*145 26 n'arọ 25kg
960*96*10mm 39pcs/ctn 710 ctn / 2551.91 sqm 9 plt, 56ctns/plt,504ctns/1810.57 sqms 980*305*145 25kg 24kg
Strand Woven Bamboo 1850*125*14mm 8pcs/ctn 672 ctn, 1243.2sqm 970*285*175 29 n'arọ 28 n'arọ
960*96*15mm 24pcs/ctn 560 ctn, 1238.63sqm 980*305*145 26 n'arọ 25 n'arọ
950*136*17mm 18pcs/ctn 672ctn, 1562.80sqm 970*285*175 29 n'arọ 28kg

Nkwakọ ngwaahịa

Nkwakọ ngwaahịa Dege Brand

DEGE-BAMBOO-FLOOR
DEGE-Horizontal-Bamboo-Floor
DEGE-BAMBOO-FLOORING
DEGE-Carbonized-Bamboo-Floor
bamboo-flooring-WAREHOUSE

Nkwakọ ngwaahịa izugbe

Strand-Woven-Bamboo-Flooring-package
carton-bamboo-flooring
bamboo-flooring-package
bamboo-flooring-cartons

Ụgbọ njem

bamboo-flooring-load
bamboo-flooring-WAREHOUSE

Usoro ngwaahịa

bamboo-flooring-produce-process

Ngwa

strand-woven-bamboo-flooring
brown-Strand-Woven-Bamboo-Flooring
Carbonized-Heavy-Bamboo-Flooring
natural-Strand-Woven-Bamboo-Flooring
bamboo-flooring-for-indoor
champagne-Heavy-Bamboo-Flooring
dark-Strand-Woven-Bamboo-Flooring
15mm-Strand-Woven-Bamboo-Flooring
flate-Heavy-Bamboo-Flooring

  • Nke gara aga:
  • Osote:

  • about17Kedu otu esi etinye ala achara (ụdị zuru ezu)

      Nrụnye ala osisi bambooadịghị nnọọ iche na ọkọlọtọ hardwood nwụnye.Maka ndị nwe ụlọ, isi ihe na-akpali akpali maka ime ntinye osisi bamboo bụ iji chekwaa ego.Enwere ike itinye ya na ọkara ego site n'ime ya n'onwe gị.Ịwụnye ala achara nwere ike ịbụ ọrụ izu ụka dị mfe.
    Ntuziaka ndị bụ isi:Tupu echichi nke ala ala ọ bụla, ị kwesịrị ijide n'aka na saịtị ọrụ na subfloor na-emezu ihe ndị a chọrọ.Nzọụkwụ dị mkpa na ntinye na-ewere ọnọdụ tupu itinye n'ala achara. Nke a bụ ntụziaka ole na ole:
    Nzọụkwụ mbụ na ntinye ala osisi bamboo bụ ijide n'aka na subfloor bụ:
    √ Ụda n'usoro
    √ dị ọcha: kpochara na enweghị irighiri ihe, wax, griiz, agba, sealers, na adhesives ochie wdg.
    √ Akọrọ: Ala dị n'okpuru ala ga-anọgide na-akọrọ kwa afọ, na
    √ Adhesives ọkwa adịghị ejikọta nke ọma na ala ala ruru unyi, ọ ga-emesịa bute ire ere, ọ bụrụ na mmiri dị.Ọ bụrụ na ọ bụghị ọkwa, ala achara ga-ama jijiji mgbe a na-aga n'ihu.
    √ Wepu ntu ochie ma ọ bụ staple n'ihe eji eme ala gara aga.
    √ Nyochaa plank ala ọ bụla maka ọkwa, agba, imecha, ịdịmma na ntụpọ.
    √ Tulee ala wee kewaa site na ọnụ ọgụgụ mbadamba.
    √ Dezie ala maka nhọrọ a na-ahụ anya.
    Ntinye nlezianya nke agba na ọka ga-eme ka mma nke ala gwụchara.
    √ A ghaghị ịchekwa ihe eji eme ala na saịtị nrụnye opekempe 24-72 awa tupu mgbe ahụ.Nke a na-enye ohere ka ala ala na-adaba na okpomọkụ nke ụlọ na iru mmiri.
    √ Akwụsịla ozugbo na kọmnta ma ọ bụ n'akụkụ mgbidi dị n'èzí.
    √ Mgbe ị na-azụrụ ala, gbakwunye 5% n'ụdị square dị mkpa maka ịcha ego.
    √ Ọ bụrụ na ị na-etinye ala achara na akụkọ nke abụọ, mgbe ahụ, tupu ị na-eji nailer / stapler, buru ụzọ wepụ ihe ọkụ ọkụ n'elu ụlọ dị n'okpuru.The stapler na-etinye nrụgide na joists ma nwee ike ịtọpụ ihe ndị a na-agbanye n'uko n'okpuru.
    √ Ọrụ ọ bụla metụtara mmiri ma ọ bụ mmiri kwesịrị ịrụ tupu arụrụ ala osisi achara.A na-atụ aro okpomọkụ ụlọ nke 60-70ºF na iru mmiri dị 40-60%.
    Ihe ndetu dị mkpa:Ala osisi bamboo kwesịrị ịbụ ihe ikpeazụ arụnyere maka ihe owuwu ọhụrụ ọ bụla ma ọ bụ nrụzigharị.Ọzọkwa, wụnye ala n'otu n'otu ụkpụrụ nduzi nke ndị nrụpụta iji chekwaa akwụkwọ ikike gị.
    Ngwa nwụnye:
    √ Mpempe teepu
    √ Handsaw (ike ịhụ na-enyekwara aka)
    √ Mkpọchi (ibe ala a kpara nke ọma)
    √ Osisi ma ọ bụ plastic spacers (1/4 ″)
    √ Ogwe olu ma ọ bụ dọkpụrụ mmanya
    √ Hama
    √ Ahịrị nzu
    √ Pensụl
    Maka nrụnye ntu ala, ị ga-achọkwa:
    √ Egbe ntu kwesịrị ka osisi siri ike
    √ Akara ngwa ntu Maka ntinye glu-down, ị ga-achọkwa:
    √ Ihe nrapado ala akwadoro
    √ Nrapado trowel
    Maka nrụnye n'elu mmiri, ị ga-achọkwa:
    √ 6-mil poly film ụfụfụ n'okpuru
    √ PVAC gluu
    √ Poly teepu ma ọ bụ duct teepu
    Ntuziaka mbụ nwụnye:
    √ Iji mee ka ala ala ahụ dabara n'okpuru, a ga-egbutu ihe mkpuchi ọnụ ụzọ ma ọ bụ wepụ ya.
    √ Ka osisi na-agbasawanye na mmụba nke ọkwa mmiri, a ga-ahapụ oghere mgbasa ozi 1/4 "n'etiti ala na mgbidi niile na ihe ndị kwụ ọtọ (dị ka ọkpọkọ na kabinet).A ga-ekpuchi nke a n'oge a na-emegharị ihe mgbakwasị ụkwụ na gburugburu ụlọ ahụ.Jiri oghere osisi ma ọ bụ plastik mee ihe mgbe ị na-etinye ya iji dokwaa oghere mgbasawanye a.
    √ Na-eji ngọngọ ịkụ aka na hama mgbe niile iji dọkọta planks ọnụ.Ekwesịrị iji ngọngọ ọpịpị mee ihe megide ire naanị, ọ bụghị megide oghere nke plank.
    √ Bido ahịrị ọ bụla mgbe niile site n'otu akụkụ nke ụlọ ahụ.
    √ Enwere ike iji uko ma ọ bụ ihe ndọta mechie nkwonkwo n'akụkụ mgbidi.
    √ Lezienụ anya ka ị ghara imebi ọnụ ụlọ ala.
    Na-amalite:Maka ọdịdị kachasị mma, a na-edobe ala osisi bamboo na mgbidi kachasị ogologo ma ọ bụ mgbidi dị n'èzí, nke na-abụkarị nke kachasị mma ma dị mma maka ịtọba ahịrị na-arụ ọrụ kwụ ọtọ.Ntuziaka nke planks kwesịrị ịdabere na nhazi nke ime ụlọ na ebe ọnụ ụzọ na windo.Ahịrị ole na ole (enweghị gluu ma ọ bụ ntu) nwere ike ịtọọ nkụ tupu ịmalite nrụnye iji kwado mkpebi nhazi gị na ahịrị ọrụ.Ọ bụrụ na ime ụlọ ahụ dị njikere maka nrụnye, na ihe niile na ngwá ọrụ dị, DIYer nwere ahụmahụ ụfọdụ n'ala nwere ike ịtụ anya ịwụnye ihe dịka 200 square ụkwụ n'ụbọchị.Usoro ntinye: Enwere ụzọ atọ a na-ahụkarị maka nrụnye ala achara: Ntu, gluedown na floating.
    1. Ntu ma ọ bụ Nzuzo:Na usoro a, a na-atụba ala achara na nzuzo n'obere ala osisi.Ọ bụ ụzọ ọdịnala e si etinye ala achara na-eji mbọ ma ọ bụ ntu.Enwere ike itinye ala niile siri ike na ọtụtụ ala arụrụ arụ ọrụ otu a.Ekwesịrị ịkanye ndị na-ahụ maka ala ala (osisi nkwado ala) iji duzie usoro ntinye.Ọzọkwa, ebe ndị joists n'ala kwesịrị ka akara na akwụkwọ mmetụta na nzu ahịrị.Akara akara ndị a ga-achọpụta ebe ntu na staples kwesịrị ịnyaba iji mee njikọ siri ike na ala ala.A na-akụtu mbọ ma ọ bụ staple ndị ahụ n'otu akụkụ site n'ire wee zoo ya n'akụkụ ala ọzọ.Ọ bụ ya mere e ji kpọọ ya 'ìsì ma ọ bụ ntu nzuzo.'Ntu osisi ọ bụla 8 "na n'ime 2" nke njedebe ọ bụla.Ozugbo etinyere ahịrị ndị mbido, a ga-akụtu planks ndị ọzọ n'elu ire n'akụkụ 45o.Enwere ike ịchọrọ ntu ihu n'ọnụ ụzọ ma ọ bụ ebe siri ike ebe onye ntu ahụ na-agaghị adaba.Ahịrị abụọ ikpeazụ ga-abụkwa kpọgidere ihu n'otu ụzọ ahụ.Ekwesịrị idowe ezigbo anya na ntinye ntu / staple penetration.
    2. NA-ECHICHE:Usoro a gụnyere ijikọta ala achara na ala ala.A na-etinye ala osisi gluu n'otu ụzọ dị ka nke tile nke ala.Enwere ike iji ya mee ihe maka ntinye n'elu ma ụlọ dị n'okpuru ala ma na plywood.Enwere ike ịwụnye ala ụlọ arụrụ arụ site na iji ụzọ gluu ala ndị yiri ya.Enwere ike igbado ala achara site na iji nrapado ala na-eguzogide mmiri (karịsịa ụdị urethane).Jiri nlezianya gụọ ntuziaka nrapado maka nha trowel kwesịrị ekwesị na oge edobere nrapado.E kwesịghị iji nrapado dabere na mmiri maka nke a.Ọzọkwa, ejikwala usoro “wet lay” ma ọ bụ “loose lay” tinye.Malite na mgbidi dị n'èzí wee gbasaa nrapado dị ka ala nwere ike kpuchie ya n'ime awa 1.Mgbe etinyere nrapado n'okpuru ala na trowel, a ga-edobe ala achara ozugbo na oghere chere ihu mgbidi ahụ.Kwe ka ikuku ventilashị zuru oke n'oge usoro ahụ.Jide n'aka na ala ahụ ka kwụ n'ahịrị ma kpachara anya ka ị ghara ikwe ka ala arụnyere na-aga na nrapado mmiri.Jiri akwa dị mmiri mmiri wepụ ngwa ngwa ọ bụla nrapado na-adaba n'elu ala.Jiri ụkwụ na ụkwụ gaa n'ala n'ime nkeji iri atọ nke ịtọgbọ ala iji hụ na njikọ siri ike na nrapado.Osisi ala dị n'ahịrị oke ọnụ ụlọ nwere ike ịchọ ibu maka njikọ a.
    3. Ala na-ese n'elu mmiri:A na-ejikọta ala na-ese n'elu mmiri n'onwe ya ma ọ bụghị n'okpuru ala.A na-etinye ya n'elu ụdị ihe nkpuchi dị iche iche.Usoro a dabara adaba na ala ala ọ bụla ma akwadoro ya maka ikpo ọkụ na-egbuke egbuke ma ọ bụ nrụnye n'okpuru ọkwa.Naanị ngwaahịa injinia sara mbara ma ọ bụ cross ply ka a ga-atụle maka ịse n'elu mmiri.Usoro a na-agụnye ijikọta ire na nkwonkwo nke ala osisi bamboo ọnụ n'elu ihe dị n'okpuru ala.Malite ahịrị nke mbụ jiri uzo chere mgbidi.Gwuo njikọ ngwụcha nke ahịrị mbụ site n'itinye nrapado na ala nke uzo.Debe ahịrị ndị na-esote ala site n'itinye gluu n'akụkụ na nkwonkwo ngwụcha yana plank dabara na ya na ngọngọ mgbata.
    Nlekọta mgbe etinyere ya:
    √ Wepu oghere mgbasawanye ma tinyegharịa isi na/ma ọ bụ ihe akpụ akpụ nke nkeji nkeji iji kpuchie oghere mgbasawanye.
    √ Ekwela ka okporo ụzọ ụkwụ ma ọ bụ ngwá ụlọ dị arọ n'ala maka awa 24 (ọ bụrụ na gluu-ala ma ọ bụ na-ese n'elu mmiri).
    √ Wepu uzuzu uzuzu ma ọ bụ kpochaa ala gị ka ị wepụ unyi ma ọ bụ irighiri ihe ọ bụla.

    spec

     

    about17slab steepụ

    20140903092458_9512 20140903092459_4044-(1) 20140903092459_4044 20140903092459_6232

    20140903092500_0607

    20140903092500_3732

    20140903092500_6701

    about17Ngwa ala achara nkịtị

    4 7 jian yin

    20140904084752_2560

    20140904085502_9188

    20140904085513_8554

    20140904085527_4167

    about17Ngwa ala achara dị arọ

    4 7 jian T ti

    20140904085539_4470

    20140904085550_6181

    Njirimara Uru Nwalee
    Njupụta: +/- 1030 n'arọ/m3 EN 14342:2005 + A1:2008
    Isi ike nke brinell: 9.5 n'arọ / mm² EN-1534:2010
    Ọdịnaya mmiri: 8.3% na 23 Celsius C na iru mmiri 50%. EN-1534:2010
    Klas mwepụ: Klas E1 (LT 0,124 mg/m3, EN 717-1) EN 717-1
    Ọzịza dị iche: 0.17% pro 1% mgbanwe na mmiri ọdịnaya EN 14341:2005
    Nguzogide abrasion: 16,000 tụgharịrị EN-14354 (12/16)
    Nkwakọba 2930 kN/cm2 EN-ISO 2409
    Nguzogide mmetụta: 6 mm EN-14354
    Njirimara ọkụ: Klas Cfl-s1 (EN 13501-1) EN 13501-1
    Dee ozi gị ebe a ziga anyị ya

    Ngwaahịa ndị metụtara