3 Nhazi Injinia Layer
Nrụpụta Injinia Multilayer
Uru Nrụpụta Nrụpụta
Nkọwapụta
| Ụdị ala | Emechara nke ọma | Ụdị | Maple/ Hard Maple |
| Agba | Agba aja aja | Ndo | Ndo Ọkara/anọpụ iche |
| Ụdị Mmecha | Urethane | Ọkwa gloss | Obere-Gloss |
| Ngwa | Ebe obibi | Ụdị isi | Multi-Ply |
| Profaịlụ | Asụsụ & Ụkwụ | Ụdị ihu | Ọbara French |
| Ogologo kachasị (n'ime.) | 48 | Ogologo kacha nta (n'ime.) | 20 |
| Nkezi ogologo (n'ime) | 33 | Obosara (n'ime) | 5 |
| Ọkpụrụkpụ (n'ime) | 0,55 | Radiant Okpomọkụ dakọtara | No |
| N'okpuru ọkwa | Ee | Nwụnye | Na-ese n'elu, gluu ala, ntu ala, Staple ala |
| Asambodo | CARB II | Yiri ọkpụrụkpụ oyi akwa (mm) | 3 |
| Emecha elu elu | Obi mgbawa, aka | Mechaa akwụkwọ ikike (na afọ) | Afọ 25 |
| Akwụkwọ ikike ụlọ (na afọ) | Afọ 25 | Mba onye si | China |
| Akụkụ nkwakọ ngwaahịa (inch) | Ogologo: 4.75 Ogologo: 84 Obosara: 5 | Akụkụ ngwaahịa | Ogologo: 9/16" Ogologo: 15 3/4 - 47 1/4" Obosara: 5" |
| Sqft / igbe | 17.5 | Atụmatụ 65 | Ntị California bi |
Ụdị imewe
Pịa Ụdị
T&G Injinia Flooring
Ulo ala Unilin Injinia
Ụdị Mmecha
Ulo ala ejiri jiri aka kpụchie
Ulo ala arụrụ n'ọkụ waya
Ngwongwo ala arụpụtara nke ọma
Ọkwa veneer
Ala ụlọ arụpụtara ABCD
CDE emebere ala ala
ABC emebere ala ala
AB emebere ala ala
Otu esi amata ọkwa ọkwa nrịbama ụlọ arụrụ arụ
1. Ụzọ ịmata ọdịiche
Ọkwa A:anaghị ekwe ka akpụ akpụ;
Ọkwa B:Ọnụ ọgụgụ nke eriri kwa pc: 1-3pcs na dayameta nke eriri nke agba ya dị oji dị n'ime 8mm na dayameta nke eriri nke agba ya fọrọ nke nta ka ọ bụrụ otu ihe mkpuchi dị n'ime 10mm;
Ọkwa C:Ọnụ ọgụgụ nke eriri kwa pc: 1-3pcs na dayameta nke eriri nke agba ya dị oji dị n'ime 20mm na dayameta nke eriri nke agba ya fọrọ nke nta ka ọ bụrụ otu ihe mkpuchi dị n'ime 25mm;Na mgbakwunye, a na-ahapụ 20% nke nsọtụ ọcha nke obosara plank ma na-anabata mgbanwe agba nke ọkara;
Ọkwa D:Ọnụ ọgụgụ nke eriri kwa pc: 1-3pcs na dayameta nke ụrọ nke agba ya dị oji dị n'ime 30mm na dayameta nke eriri nke agba ya fọrọ nke nta ka ọ bụrụ otu ihe mkpuchi na-akparaghị ókè;Tụkwasị na nke ahụ, ogologo mgbawa dị n'ime 30cm ma a na-ahapụ mgbanwe dị ukwuu nke agba;
2.Pcentage
Ọkwa ABC:Pasent nke ọkwa AB: 15%, Pasent nke ọkwa C: 85%;
ABCD ọkwa:Pasent AB: 20%, Pasent C: 50%, Pasent nke ọkwa D: 30%
3. Foto
Asambodo
Usoro ngwaahịa
Ahịa anyị
Ngwa
Ọrụ 1
Ọrụ 2
Otu esi etinye n'ala osisi arụrụ arụ
Nzọụkwụ 1.
Hichaa ala, sụọ shọvel siment na-esi n'ala pụta, wee jiri broom hichaa ya.A ghaghị kpochaa ájá na ciment slurry na ala nke ọma, ma ọ bụghị ya, ọ ga-agbapụta mgbe echichi!
Okwu:
Enwere ike ịtọ ala ala naanị mgbe mmiri dị n'ime ala na-erughị 20, ma ọ bụghị ya, ala ahụ ga-aghọ ihe na-akpụ akpụ na arched mgbe ịtọsịrị ya!
Nzọụkwụ 2.
Mgbe emechara ala niile, gbasaa ihe nkiri plastik dị mkpa, nke kwesịrị ka a kpuchie ya kpamkpam, na nkwonkwo kwesịrị ijikọ iji kewaa ala na ala.
Nzọpụ 3.
Mgbe ịtọsịrị ihe nkiri plastik, dina ihe nkiri mulch pụrụ iche n'ala.E kwesịkwara ịkwado ya ma tọọ ya nke ọma.Ọ kacha mma ka mmadụ abụọ nyere aka.
Nzọụkwụ 4.
Mgbe ịtọsịrị mulch ahụ, onye nrụnye wepụrụ ọtụtụ ala site na igbe ahụ wee gbasaa ha niile n'ala, na-ahọrọ ọdịiche agba, na-etinye nnukwu ọdịiche agba n'okpuru akwa na akwa akwa, ma gbasaa ya na ebe doro anya na agba edo edo. iche.
Nzọpụ 5.
Malite ntinye iwu nke ala.Nna-ukwu nrụnye na-egbutu ala otu otu, wee tinye ha dị ka egosiri na foto a.Naanị jiri hama mee ka ike dị n'etiti ala na ala.The echichi nna ukwu bụ nnọọ nkà na echichi ọsọ bụ nnọọ ngwa ngwa!Hapụ ihe dịka 1 cm n'etiti ala na mgbidi.
Nzọpụ 6.
Ọ bụrụ na ala ahụ dị ogologo, tinye ya na onye na-egbutu ala ma bee ya n'ogologo achọrọ.Enweghị ike itinye igwe na-egbutu ozugbo na taịlị ala.Iji gbochie ikpochapụ olulu ahụ, a ga-etinye kaadiboodu buru ibu n'ala.
NKWUKWU 7.
N'ozuzu, ntinye nke ala na-arụ site na mmadụ 2, ngụkọta nke ihe dịka 35 square mita, ọ were naanị awa 6 na mkpokọta.
NKWUKWU 8.
Mgbe emechara ala, tinye isi iyi n'etiti ala na mgbidi.Mmiri ahụ ga-agbasawanye na nkwekọrịta na okpomọkụ.Jiri ngwá ọrụ ígwè pụrụ iche tinye ya n'ime oghere ahụ.
NKWUKWU 9.
Iji wụnye uwe mwụda ahụ, ịkwesịrị iji mbọ aka dozie uwe mwụda ahụ na mgbidi, ma mechie uwe mwụda na mgbidi na gluu iko.
Nzọpụ 10.
A na-etinye ala na sket niile, agba ha ka na-adaba adaba, na ala a rụnyere ọhụrụ dịkwa mma nke ukwuu, ya mere ala arụnyere enweghị ụda.
Elu osisi dị iche iche injinia, ụzọ ntinye
1.Classic Series Engineered Flooring
2.Herringbone Series Engineered Flooring
3.Chevron Series Engineered Flooring
| Nchekwa ọkụ: | Mmeghachi omume na ọkụ - ala osisi na-arụ ọrụ na EN 13501-1 Dn s1 |
| Nrụpụta okpomọkụ: | EN ISO 10456 na EN ISO 12664 Nsonaazụ 0.15 W / (mk) |
| Ọdịnaya Ọdịnaya: | TS EN 13183-1 chọrọ: 6% ruo 9% nkezi nsonaazụ: <7% |
| Nrụpụta okpomọkụ: | EN ISO 10456 / EN ISO 12664 Nsonaazụ 0.15 W / (mk) |
| Mwepụta nke formaldehyde: | Klas E1 |TS EN 717 - 1: 2006 Nsonaazụ 0.014 mg / m3 chọrọ: ihe na-erughị 3 ppm Nsonaazụ: 0.0053 ppm |
| Nguzogide ntupu: | A nwalere na BS 7967-2: 2002 (Pendulum Test in PTV values) Mmanu rụchaa nsonaazụ: DRY (66) OTU RISK WET (29) EKWU OKWU Ọ dịghị ihe a chọrọ ugbu a maka nkwụsị nkwụsị na mmepe obibi. |
| Kwesịrị ekwesị iji: | Kwesịrị ekwesị maka iji ya na ikpo ọkụ n'okpuru ala na ngwa azụmahịa na ebe obibi |
| Mmetụta sitere na mmiri: | Ala osisi ga-agbasa ma ọ bụrụ na ekpughere ya na ọnọdụ ndị na-eme ka mmiri dị elu karịa 9%.Ala osisi ga-enwe nkwekọrịta ma ọ bụrụ na ọnọdụ ndị a na-eme ugbu a belata ọdịnaya mmiri nke ngwaahịa n'okpuru 6%.Mkpughe ọ bụla na-abụghị nke parampat ndị a ga-emebi arụmọrụ ngwaahịa ahụ |
| Mbufe ụda: | Ngwunye osisi n'onwe ya ga-enye ụfọdụ enyemaka iji belata ntụgharị nke ụda, ma ọ bụ ihe nrụpụta nke ala dum na gburugburu ya na-eme ka mmetụta na ụda ikuku na-eme ka ọ dị elu.Maka ntule ziri ezi kwesịrị iwere onye injinia tozuru oke iji gbakọọ otu esi enweta nsonaazụ ziri ezi. |
| Njirimara okpomọkụ: | Mpempe akwụkwọ osisi siri ike na-enye ụkpụrụ ndị a: mbadamba 20mm nwere oke oyi akwa 4mm ma ọ bụ 6mm ga-atụfu mbadamba 0.10 K / Wm2 15mm nwere 4mm ma ọ bụ 6mm n'elu oyi akwa ga-atụfu 0.08 K / Wm2 |
