Kedu ihe bụ ihe ndozi osisi plastik mejupụtara?
Osisi Plastic Composite ihe eji eme akwa akwa bụ ụdị ọhụrụ nke ihe eji arụ ụlọ na-akwado gburugburu ebe obibi nke pụtara n'oge na-adịbeghị anya.Enwere ike iji ihe eji eme ihe na-emepụta osisi-plastic dị ka ihe ndị dị ka plastik na-ekpofu ihe na osisi na-abaghị uru, osisi oroma nke ugbo na nke ọhịa na eriri osisi ndị ọzọ, na-enweghị ihe ọ bụla na-emerụ ahụ.Ọzọkwa, enwere ike ịmegharị ya ma jiri ya mee ihe ọzọ, a pụkwara ịkpọ ya ngwaahịa ọhụrụ nke nchebe gburugburu ebe obibi, nchekwa ike, na imegharị ihe onwunwe n'ezie.
Mgbe a na-eji ihe ndozi ihe mejupụtara mejupụtara dị ka ndebiri ụlọ, ha nwere ike imeziwanye arụmọrụ ihe owuwu ma belata oge owuwu ihe.Tụnyere usoro ọdịnala, ụdị osisi-plastic nwere ike ịzọpụta ihe dịka 30% n'otu ọnụ ahịa ojiji zuru oke, yana ọnụ ahịa inyeaka nwere ike belata ihe dịka 40%, nke na-ebelata ọnụ ahịa ihe owuwu ihe ruru 5%.
Uru:
a.Ihe na-egbochi mmiri na mildew.Onye ọ bụla maara na ala osisi siri ike ma ọ bụ ala osisi anticorrosive a na-eji n'èzí na-enwe mmetụta nke mmiri na mmiri.Mmiri ogologo oge ma ọ bụ ebe iru mmiri ga-eme ka ala osisi siri ike gbawa, kpụọ, zaa, na nrụrụ.Ala osisi (osisi-plastic) na-edozi n'ụzọ bụ isi na-edozi adịghị ike a nke ala osisi siri ike.Ọ bụ ihe pụtara ìhè karịa n'ihe gbasara enweghị mmiri, ihe anaghị egbochi mmiri na arụ ọrụ mildew.Ya mere, enwere ike iji ala osisi plastik mee ihe na gburugburu ebe enweghị ike itinye ala osisi anticorrosive ọdịnala.
b.Ụdị na agba bara ọgaranya.N'iji ya na ala osisi anticorrosive ọdịnala, ala osisi rọba ọ bụghị naanị nwere osisi okike na udidi, kamakwa ọ nwere agba ka ukwuu, nke nwere ike ime ka ịchọ mma dị n'èzí bụrụ ahaziri onwe ya.
c.Mgbochi ụmụ ahụhụ na ndanda: ụmụ ahụhụ ma ọ bụ ọdụ ga-emebi ala osisi siri ike, na ala osisi plastik nwere ike igbochi pests na ndanda nke ọma, yabụ ndụ ọrụ ga-adị ogologo karịa ala osisi anticorrosive ọdịnala.
d.Plasticity siri ike: Enwere ọtụtụ ụdị na agba nke ụlọ osisi plastik, yabụ na ọ dabara maka ụdị ịchọ mma dị iche iche ma nwee ike nweta ihe ngosi ahaziri onwe ya, yabụ plasticity ya dị mma karịa ala osisi anticorrosive nkịtị.
e.Nchekwa gburugburu ebe obibi nke carbon dị ala yana formaldehyde efu: Ngwunye osisi plastik enweghị ihe ọla dị arọ, ọdịnaya formaldehyde na-emezu ụkpụrụ EO.
f.Mgbochi ọkụ: Ala osisi plastik nwere ike na-egbochi ire ọkụ nke ọma, ogo ọkụ ya ruru B1.Ọ nwere ike imenyụ onwe ya pụọ na ọkụ, ọ dịghịkwa emepụta gas na-egbu egbu na nke na-emerụ ahụ.
g.Nrụnye dị mfe: Ntinye nke ụlọ osisi plastik dị mfe ma dị mma, ọ dịghị achọ usoro nhazi mgbagwoju anya, ọ pụkwara ịchekwa oge ntinye na ụgwọ ọrụ.
Ihe ọghọm:
a.Thermal mgbasawanye na mkpirisi: Ọ bụrụ na okpomọkụ dị iche n'etiti ehihie na abalị na ojiji gburugburu ebe obibi bụ nnukwu, elu oyi akwa na isi oyi akwa nke plastic osisi n'ala ga-ekwekọghị ekwekọ okpomọkụ mgbanwe, nke ga-adị mfe ime ka mgbasa na deformation, nke ga-emetụtakwa ndụ ọrụ nke ala osisi plastik.Mee mmetụta.
b.Ọdịda n'elu: Iji chekwaa ọnụ ahịa nke usoro na usoro mmepụta, ụfọdụ obere ụlọ nrụpụta osisi plastik ga-ebelata ojiji nke antioxidants, ndị na-ejikọta ọnụ na ihe mgbakwunye ndị ọzọ na-agba ume metụtara ya.N'okwu a, ala osisi plastik bụ nsogbu ndị dị ka nkụda mmụọ siri ike, mgbakasị na mgbawa nke ihe, ọzịza na ebu ga-eme.
Nhazi
Foto nkọwa
Nkọwapụta ihe ndozi WPC
Ihe onwunwe | 32% HDPE, 58% ntụ ntụ osisi, 10% Ihe mgbakwunye kemịkalụ |
Nha | 138*39mm, 140*25/30mm, 145*25/30mm, 146*24mm |
Ogologo | 2200mm, 2800mm, 2900mm ma ọ bụ ahaziri |
Agba | Red (RW), Maple (MA), Reddish Brown (RB), Teak (TK), Osisi (SB), Kọfị gbara ọchịchịrị (DC), Kọfị Light (LC), Light Grey (LG), Green (GN) |
Ọgwụgwọ elu | Aja, ngwo dị mkpa, oghere dị larịị, oghere dị ogologo, ahịhịa ahịhịa, ahịhịa osisi, Embossed 3D, ọka ogbugbo, ụkpụrụ mgbanaka |
Ngwa | Ubi, Lawn, mbara ihu, Corridor, Garage, Pool gburugburu, Beach Road, Scenic, wdg. |
Ogologo ndụ | Ụlọ: 15-20 afọ, Azụmahịa: 10-15 afọ |
Nka nka | Ibu ọdịda mgbanwe mgbanwe: 3876N (≥2500N) Ntinye mmiri: 1.2% (≤10%) Ihe na-egbochi ọkụ: B1 ọkwa |
Asambodo | CE, SGS, ISO |
Nkwakọ ngwaahịa | Ihe dịka 800sqm/20ft na ihe dịka 1300sqm/40HQ |
Agba dị
WPC Decking elu
ngwugwu
Usoro ngwaahịa
Ngwa
Ọrụ 1
Ọrụ 2
Ọrụ 3
Ngwa Wpc Decking
L Edge Mpekere plastik Mpempe igwe anaghị agba nchara Wpc igbe
Nzọụkwụ nwụnye Wpc Decking
Njupụta | 1.35g/m3 (Ọkọlọtọ: ASTM D792-13 Usoro B) |
Ike ọdụdọ | 23.2MPa (Ọkọlọtọ: ASTM D638-14) |
Ike mgbanwe | 26.5Mp (Ọkọlọtọ: ASTM D790-10) |
Modulus Flexural | 32.5Mp (Ọkọlọtọ: ASTM D790-10) |
Ike mmetụta | 68J/m (Ọkọlọtọ: ASTM D4812-11) |
Ike ike mmiri | D68 (Ọkọlọtọ: ASTM D2240-05) |
Ntinye mmiri | 0.65% (Ọkọlọtọ: ASTM D570-98) |
Mgbasa ọkụ ọkụ | 42.12 x10-6 (Ọkọlọtọ: ASTM D696 - 08) |
na-eguzogide ọgwụ | R11 (Ọkọlọtọ: DIN 51130:2014) |