ʻO ka hoʻopaʻa ʻana o ka pā Wpc Composite waho 218.27mm

ʻO ka wehewehe pōkole:

Brand

DEGE

Inoa

PAPA PALA WPC

'ikamu

KA PILI

Nui maʻamau

ʻāpana WPC

30% HDPE + 60% lāʻau fiber + 10% mea hoʻohui

Mea lako

ʻōnaehana maʻalahi clip patented


Huahana Huahana

Hōʻike kala

Hoʻokomo

Nā kikoʻī ʻenehana

Huahana Huahana

wikiō

1

He aha ka pāpaʻi WPC?

ʻO ka uhi ʻana o ka pā WPC, ka ʻōlelo ʻana i ka ʻōlelo, ʻo ka pale ʻana o ka pā waho ke ʻano hana, ʻo ia ke kau ʻana i ka papa ma waho o ka pā ma o ke kau maloʻo a me nā ʻano hana ʻē aʻe e hoʻokō ai i ka hoʻonaninani a i ʻole ka insulation thermal.Mai ka hiʻohiʻona o ka huahana, ʻo ka pā o waho e kau ana i kahi ʻano mea hale, ʻo ia ka papa kūkulu hale i hoʻohana ʻia no ka pā o waho.Pono nā ʻaoʻao o ka pā o waho e like me ke kūpaʻa corrosion, ke kūpaʻa wela kiʻekiʻe, ka pale ʻana i ka wā kahiko, ka ʻole o ka radiation, ka pale ʻana i ke ahi, ka pale ʻana i nā pepeke, a me ka non-deformation.I ka manawa like, pono ia i ke ʻano nani, ke kūkulu maʻalahi, ka mālama ʻana i ke kaiapuni a me ka mālama ʻana i ka ikehu.

Wpc waho pā panel, he 'ano o Composite mea me ka pvc a me ka laau puluniu e like me ke kino nui, i hoʻohana 'ia no ka paia waho o ka hale;ʻo ia ke kuleana o ka uhi, pale a me ka hoʻonani.Hiki ke hana hou ʻia nā pā pā waho lāʻau waho, a ʻoi aku ka haʻahaʻa o ka hoʻohana ʻana i ka ikehu o ke kaʻina hana ma mua o ka sima a me nā tile.He mea kūkulu hale ʻōmaʻomaʻo ia i kūpono i ka mālama ʻana i ke kaiapuni.ʻO ka hoʻonohonoho ʻana a me ke kūkulu ʻana o ka pā waho WPC he maʻalahi a wikiwiki, a hiki ke hui pū ʻia me nā paia o nā hale like ʻole;ʻAʻole pili ka hana maloʻo a pau i ke kau;maʻalahi ka hoʻomaʻemaʻe ʻana i ka wā e hoʻohana ai (hiki ke hoʻohana ʻia ka ʻōpala wai), ʻaʻole pono ka mālama ʻana (ʻaʻohe pena a me ka uhi ʻana);He kiʻekiʻe ke kumu kūʻai o ka hana, a ʻo ka pā o waho e kau ana i ka pā i nā mea maikaʻi o ka lapalapa ahi, ka pale ʻana i ka wai, ka pale ʻana i ka corrosion, ke kūpaʻa ʻelemakule, a me nā mea ʻē aʻe, a hiki i ke ola lawelawe ke hiki i nā makahiki he 30.ʻO ka momona, nā kala kuʻuna a me ke ʻano o ka palaoa maikaʻi e pale i ka hale me ka nani a pinepine.ʻO ka waihoʻoluʻu o ka papa e kau ana mai ka huahana ponoʻī, ʻaʻole e loaʻa nā māwae, ka ʻili a me ka blistering ma ka ʻili o ka pena maʻamau.He ʻokoʻa hoʻi ia me ka lāʻau, e popopo ai ʻole piʻo ma muli o ka haʻahaʻa.ʻO ka mea nui aku, hoʻohana nā pā pā Wpc i kahi papa vinyl paʻa e pale i ka hale.Hiki i ka hoʻolālā hoʻolālā waiwai polyethylene paʻa ke pale aku i ka hoʻouka ʻana o ka wā ʻino, e like me ka hale hou no nā makahiki he nui.

Nā kiʻi kikoʻī

AL-K218-28A
IMG_6902
IMG_6903
IMG_6904
IMG_6906
IMG_6907

Hōʻike kala

color-(1)
icon (1)
Ola lōʻihi
icon (2)
Mālama Haʻahaʻa
icon (3)
ʻAʻohe Warping a Māmala ʻole
icon (4)
ʻO nā papa hele wāwae-pale
icon (5)
Kūleʻa Kākaʻi
icon (6)
Paʻa Paʻa
icon (7)
Paʻa wai
icon (8)
15 Makahiki Warranty
icon (9)
95% lāʻau hana hou a me ka plastic
icon (10)
Anti-microbial
icon (12)
Pale ahi
icon (11)
Hoʻokomo maʻalahi

ʻĀpana

Brand

DEGE

Inoa

PAPA PALA WPC

'ikamu

KA PILI

Nui maʻamau

 

ʻāpana WPC

30% HDPE + 60% lāʻau fiber + 10% mea hoʻohui

Mea lako

ʻōnaehana maʻalahi clip patented

Ka manawa hoʻouna

Ma kahi o 20-25 mau lā no hoʻokahi pahu 20'ft

Uku

30% waiho ʻia, pono e uku ʻia ke koena ma mua o ka hoʻouna ʻana

Ka malama ana

Mālama manuahi

Hana hou

100% hiki ke hana hou

Pūʻolo

Pallet a puʻupuʻu nui

Loaʻa ka ʻili

WPC-cladding-Sanding-surface
WPC-cladding-Wood-Grain-surafce

Ho'āʻo maikaʻi

Quality-Test-1
Quality-Test-2
Quality-Test-3

Ke Kaʻina Hana Wpc Wall Panel

production-process

A. ʻO ka lāʻau plastik PE i kēia manawa ka ʻano lāʻau plastik i hoʻohana nui ʻia ma ka honua, ʻo ia hoʻi, kā mākou WPC CLADDING, WPC FENCING.ʻO ka mea mua, e hoʻomaopopo kākou i nā mea maka o nā huahana lāʻau plastik PE.ʻO nā mea waiwai nui ka PE plastic a me ka pauka lāʻau poplar., Toner, anti-ultraviolet absorber, compatibilizer.
1. PE plastic: ʻO ka hoʻohālikelike piha ʻana o ke kumukūʻai a me ka fusion HDPE ka mea maikaʻi loa, a ʻo ka lāʻau plastik ma ka mākeke e hoʻohana maoli i nā mea hana hou ma ke ʻano he mea maka nui, e hōʻemi ana i ka pollution keʻokeʻo a hoʻonui i ko mākou kaiapuni i ke olakino a me ke kaiapuni.Ua kapa ʻia ʻo "Recycled" i nā mea plastik recycled.ʻO nā mea ʻilika hiki ke hoʻohana hou ʻia i ka ʻoihana e hiki ke hoʻohana hou ʻia ma o kekahi kaʻina hana i kapa ʻia he plastik recycled;Ua māhele ʻia nā mea hana hou i nā māka he nui, e like me nā mea hana hou a me ka papa mua., Ka lua o ka hana hou ana, ke kula ki'eki'e a i 'ole ka 'ōpala, he ma'alahi ke ho'omaopopo i ka mana'o maoli, 'o ke ki'eki'e o ka papa, 'o ka li'ili'i o ka haumia o ka plastic, ka 'ōpala ma ke 'ano ki'eki'e i loko o ka haumia, a me ke koho pono 'ana i nā mea waiwai. pili i ke koho ʻana i ka lāʻau palaki No ka mea, ʻo ka mea lāʻau plastic-lāʻau kahi mokuʻāina kahi i wahī ʻia ai ka pauda lāʻau me ka plastic, inā kiʻekiʻe ka mea haumia o ka plastic, a liʻiliʻi ka hapa o ka plastik ponoʻī, ʻaʻole hiki iā ia ke uhi pono i ka pauda lāʻau. .
2. ʻO ka palaoa lāʻau: I mea e hoʻokō pono ai i ka hui ʻana o ka palaoa lāʻau a me ka plastic i ka lāʻau plastik, ʻaʻole wale nā ​​koi koʻikoʻi ma nā plastics, akā ʻo ka palaoa lāʻau hoʻi: ʻoi aku ka maikaʻi o ka palaoa lāʻau o ke kaupaona like, ʻoi aku ka nui o ka ʻili. o ka pauda.ʻO ke kiʻekiʻe o ka nui o ka plastic i koi ʻia;akā, ʻoi aku ka nui o ka pauka pauka lāʻau, ʻoi aku ka liʻiliʻi o ka ʻili o ka pauka, a ʻo ka haʻahaʻa o ka nui o ka plastic i koi ʻia i ka wā fusion plastic.Ma hope o nā makahiki he nui o nā hoʻokolohua, ʻo ka pauka lāʻau poplar ka pauka lāʻau maikaʻi loa, a ʻo ka nui o ka pauka ka mea maikaʻi loa i ka mānoanoa o 80-100 mesh;ʻOi aku ka maikaʻi o ka pauka, ʻoi aku ka kiʻekiʻe o ke kumukūʻai, ʻoi aku ka nui o ka haku mele, a ʻoi aku ka kiʻekiʻe o ke kumukūʻai, akā ʻoi aku ka kiʻekiʻe o ka plastic-wood product molded;inā ʻoʻoleʻa loa ka pauda, ​​haʻahaʻa ke kumukūʻai o ka hana, a ʻoi aku ka liʻiliʻi o nā koi ʻana i ka ʻilika, akā ʻaʻole lawa ka hui ʻana o ka lāʻau plastik i hoʻoheheʻe ʻia, palupalu, a maʻalahi hoʻi e haki.
3. Nā mea kōkua: ʻO ka hana nui o ka toner e hoʻohālikelike i ke kala o nā mea lāʻau plastik.I kēia manawa, ʻo ka noi nui o ka lāʻau plastik PE he pauka kala inorganic.ʻOi aku ka maikaʻi o ka hana anti-fading no ka hoʻohana ʻana i waho, ʻokoʻa ia mai ke kala organik i hoʻohana ʻia no ka lāʻau kaiaola PVC i loko.ʻOi aku ka ʻoi aʻe o ka ʻōlinolino o ka pauka, ka waihoʻoluʻu toner organik.ʻO ka hana nui o ka anti-ultraviolet absorber ʻo ia ka hoʻomaikaʻi ʻana i ka hiki ke anti-ultraviolet o ka hoʻohana ʻana i ka lāʻau plastik i waho, a hoʻomaikaʻi i ka hana anti-kahiko.ʻO ka Compatibilizer kahi mea hoʻohui e hāpai i ka hoʻohālikelike ma waena o ka palaoa lāʻau a me ka resin.

B. E hoʻomaopopo i nā mea maka o ka lāʻau plastik, ʻo ka hana aʻe ʻo ka pelletize.E like me ka mea i ʻike ʻia ma luna, e hui e like me kekahi ratio, extrude plastic wood pellets ma ke kiʻekiʻe wela fusion maloʻo, a hoʻopaʻa iā lākou no ka hoʻohana.ʻO ka hana nui o nā lako pelletizing ka hoʻomaopopo ʻana i ke kaʻina hana pre-plasticization o ka pauka lāʻau a me ka plastic, ʻike i ka hui pū ʻana o nā mea pauka biomass a me ka plastic PE ma lalo o nā kūlana hoʻoheheʻe, a hana i ka pretreatment no ka hana ʻana i nā mea lāʻau plastic.Ma muli o ka maikaʻi ʻole o ka hoʻoheheʻe ʻana o ka lāʻau-plastic melt, ʻaʻole like ka hoʻolālā ʻana o ka pelletizer mea lāʻau-plastic a me ka pelletizer plastic.No nā plastics like ʻole, ʻokoʻa ka hoʻolālā ʻana o ka pelletizer.Hoʻohana maʻamau ka pelletizer no ka polyethylene i ka conical twin-screw extruder, no ka mea, ʻo ka polyethylene he resin paʻa wela, a ʻo ka conical twin-screw extruder he ikaika ʻoki ʻoki a ʻano like ka lōʻihi o ka screw.He pōkole ka twin screw extruder, e hōʻemi ana i ka manawa noho o ka mea i loko o ka pahu.ʻO ke anawaena o waho o ka wili he hoʻolālā conical mai ka nui a i ka liʻiliʻi, no laila ua nui ka nui o ka hoʻopili ʻana, a hiki ke hoʻopili ʻia nā mea i loko o ka pahu.

C. Ma hope o ka pelletizing, komo ia i ke kahua extrusion.Pono e hana ʻia kekahi mau hoʻomākaukau ma mua o ka extrusion:
1. E hōʻoia i ʻaʻohe haumia a i ʻole nā ​​ʻāpana kala ʻē aʻe i koe i loko o ka pahu i mea e pale ai i ke kala haumia o ka lāʻau plastik i hana ʻia;
2. E hōʻoia inā ʻaʻole i hoʻopaʻa ʻia nā mea hoʻoheheʻe o ka extruder a e hōʻoia i ka emi ʻole o ka degere ma mua o -0.08mpa.Pono e hoʻomaʻemaʻe ʻia ka pahu hau i ʻelua manawa i kēlā me kēia neʻe inā he mea maʻamau.Mai hoʻohana i nā mea metala no ka hoʻomaʻemaʻe ʻana i nā lua hoʻopau, a hoʻohana i ka plastik a i ʻole nā ​​lāʻau lāʻau e hoʻomaʻemaʻe i nā mea haumia i loko o nā lua o ka pahu;
3. E nānā inā ua lako ka hopper me kahi kānana metala.Hoʻopili ʻia nā ʻāpana ma o ka metala e hoʻoneʻe i nā haumia metala i hui ʻia i loko o nā ʻāpana, e hōʻemi i ka ʻaʻahu ʻana o nā haumia metala ma loko o nā mea hana a hōʻoia i ka hui pono ʻana o nā kiʻi lāʻau plastik i hoʻoheheʻe ʻia.
4. Ke hana maʻamau nei ka ʻōnaehana wai anuanu.ʻO kahi ʻōnaehana wai hoʻoluʻu maikaʻi ka mea pono no ka hoʻomaha ʻana ma hope o ka extrusion lāʻau plastic.Hiki i ka mālama ʻana i ka manawa kūpono ke hōʻoia i ke ʻano maikaʻi o nā profiles plastic-wood profile.
5. E hoʻokomo i nā ʻōpala lāʻau plastik, a e hoʻokomo i nā mole i koho ʻia e like me nā kiʻi e hana ʻia.
6. E nānā inā hiki i ka mīkini ʻoki pneumatic a me nā ʻāpana ʻē aʻe ke hana maʻamau.

D. He mea kiʻekiʻe ka mahana o ka mea hou extruded plastic-wood profile, a pono e kau lima ʻia ma luna o kahi lepo palahalaha.Ma hope o ka ʻoluʻolu loa o ka profile, e hana ʻia a hoʻopaʻa ʻia.ʻOiai he maʻalahi kēia hana, he mea nui loa ia.Inā hōʻole ka hale hana i kēia mau kikoʻī, loaʻa pinepine nā hemahema o nā mea hana.E alakaʻi maʻalahi ka lāʻau plastik ʻole i nā mānoanoa like ʻole o ka ʻili o luna a me lalo o ka huahana ma hope o ka wili ʻana a me ka hana ʻana.Eia kekahi, ʻo nā ʻaoʻao like ʻole e lawe mai i kekahi mau pilikia i ke kūkulu ʻana a pili i ka hopena ʻāina.

E. E like me ka makemake o nā mea kūʻai aku, e hana i ka plastic-wood profiles:
1. ʻO ka hana wili ʻana ʻo ia ka wehe ʻana i kahi papa o ka ʻili plastik i hana ʻia i ka wā i hoʻokuʻu ʻia ai ka ʻaoʻao lāʻau plastik, i ʻoi aku ka maikaʻi o ka pale ʻana o ka lāʻau plastik ke hoʻokomo ʻia ma ka hale hana.
2. Hoʻomaʻamaʻa embossing: Ma hope o ka hoʻonani ʻia ʻana o ka ʻili o ka ʻaoʻao, ua hoʻopili ʻia ka lāʻau plastik i mea e loaʻa ai ka hopena e like me ka lāʻau.
3. ʻO kaʻokiʻana, ka hana tenoning, ka nui i hoʻonohonohoʻia e like me ka makemake o ka mea kūʻai, a me nā huahana i hanaʻia e like me nā pono o ka tenoning.
4. Ma hope o ka pau ʻana o ka hana ʻana ma luna, ʻo ka hana hope loa e hoʻopili i ka huahana.Hiki ke hōʻemi i ka pōʻino i hana ʻia e ka huahana i ka wā o ka lawe ʻana.

package

Ka hihia ʻenekinia

application-(2)
application-(1)
application-(7)
application-(9)
application-(3)
application-(8)

Hana ʻenekinia 2

project (9)
project (12)
project (11)
project (5)
project (8)
project (2)
project (3)
project (6)
project (4)

  • Mua:
  • Aʻe:

  • 43
    43
    43
    43
    43
    43

    cladding-wall-installation cladding-wall-metral-clip

    Ka mua:e hoʻokomo mua i ka keel, hiki i ka Keel ke lāʻau a i ʻole Wpc

    Ka lua:e hoʻopaʻa i ka pā o waho ma ke keel me ke kaula hao

    Ke kolu:e hoʻopaʻa i ka pahu metala a me ke kile me ka pū kui ea a i ʻole nā ​​wili

    Ka ʻehā:ma hope o ka hoʻokomo ʻana i ka pā pā wpc waho aʻe i loko o ka laka o ka pā o ka paia o luna, e hoʻohana i ka pū kui ea a i ʻole ka wili e koho ai i ka pahu metala a me ke kiel.

    Ka lima:e hana hou i ka ha

    Ka ono:ma hope o ka pau ʻana o ka hoʻokomo ʻana o ka pā pā, e hoʻohui i nā kaula L lihi a puni

    ʻO ka mānoanoa 1.33g/m3 (Maʻamau: ASTM D792-13 Hanana B)
    Ka ikaika tensile 24.5 MPa (Maʻamau: ASTM D638-14)
    Ka ikaika wiliwili 34.5Mp (Maʻamau: ASTM D790-10)
    Modulus Flexural 3565Mp (Maʻamau: ASTM D790-10)
    Ka ikaika hopena 84J/m (Maʻamau: ASTM D4812-11)
    ʻOʻoleʻa kahakai D71 (Maʻamau: ASTM D2240-05)
    Ka hoʻoheheʻe wai 0.65%(Maʻamau: ASTM D570-98)
    Hoʻonui wela 33.25×10-6 (Maʻamau: ASTM D696 – 08)
    Kūleʻa paheʻe R11 (Maʻamau: DIN 51130:2014)
    E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou

    NA HUAKAI PILI