Bidiyo
Bangon bangon ciki nau'i ne na kayan ado na bango, babban abu shine kayan itace-roba (wpc), sabon kayan da ke da alaƙa da muhalli.launi na itace, zane-zane, launuka na dutse suna samuwa don zaɓar, kuma yana da fa'idodi na hana ruwa, turmi, shiru, sauƙin shigarwa, da dai sauransu ana amfani da shi sosai a cikin haɓaka gida da wuraren kasuwanci.
Ma'aunin Ciki na Panel
| Sunan samfur | Bangon Cikin Gida, |
| Samfura | Wpc Wall |
| Girman | 2900*159*9mm |
| Surface | Pvc Film Laminated |
| Kayan abu | WPC: Itace Pvc Composite.Haɗin gari na itace da polyethylene tare da ƙari na wasu ƙari |
| Launi | Itacen itacen oak, Zinari, Mahogany, Teak, Cedar, Ja, Classic launin toka, Black gyada |
| Mafi ƙarancin oda | Cikakken Kwantena 20ft, Mita 500 kowane Launi |
| Kunshin | Standard canton |
| Ruwan sha | Kasa da 1% |
| Matakin hana wuta | Matakin B |
| Lokacin biyan kuɗi | 30% T / T a gaba, saura 70% biya kafin kaya |
| Lokacin bayarwa | A cikin kwanaki 30 |
| Magana | Ana iya canza launi da girman bisa ga buƙatarku |
| Aikace-aikace
Amfani
| Otal-otal, gine-ginen kasuwanci, asibiti, makarantu, dafa abinci na gida, bandaki, adon ciki da sauransu |
| 1) Matsayin kwanciyar hankali, tsawon rai, jin daɗin yanayi | |
| 2) Juriya ga rubewa da tsagewa | |
| 3) Tsaya akan kewayon zafin jiki mai faɗi, mai jure yanayin yanayi | |
| 4) Juriya da danshi, ƙananan harshen wuta | |
| 5) Babban tasiri mai juriya | |
| 6) Fitaccen dunƙule da riƙe ƙusa | |
| 7) Abokan muhalli, sake yin amfani da su | |
| 8) Broad kewayon gama da bayyanar | |
| 9) Sauƙaƙan samarwa da sauƙi ƙirƙira | |
| 10) Ba ya ƙunshi sinadarai masu guba ko abubuwan kiyayewa |
Hoton Tasirin bangon bangon ciki
Amfanin bangon bango
Tsarin Samar da Panel Panel Wpc
Aikace-aikace
Aikin 1
Aikin 2
Launukan Tufafi
Launuka masu tsafta
Shigarwa
1.Interior Wpc cladding Panel Installation Bidiyo koyawa 1:
Kai tsaye Yi amfani da bindigar ƙusa ta iska kai tsaye don gyara ƙusa a gefen kulle panel ɗin bango don gyara bangon
2.Interior Wpc Louvre Installation Video tutorial 2:
Lokacin da bango ya yi rashin daidaituwa, yi amfani da styrofoam a bayan allon Wpc Louvre, kuma kai tsaye yi amfani da bindigar ƙusa ta iska don gyara ƙusa a gefen makullin bangon don gyara bangon.
3.Indoor Wpc Wall Cladding Shigar Koyarwar Bidiyo 3:
Gyara kulle bangon bango kai tsaye ta cikin shirye-shiryen ƙarfe, idan shimfidar bangon ya cika buƙatun shigarwa
Na'urorin haɗi don bangon Wpc
1.Layin Kwangila
2.L Gashi
3. Karfe Clips
Shigar bangon Wpc don bango da Rufi
Mataki na farko shine tabbatar da ko bangon yana lebur.Idan bangon yana kwance, zaku iya shigar da bangon wpc na cikin gida kai tsaye akan bango.Idan bangon bai dace ba, kuna buƙatar shigar da katako na katako a bango a matsayin tallafi na farko, kuma nisa tsakanin kowane keel dole ne ya zama 25 cm baya.
A mataki na biyu, tun da na cikin gida wpc bango panel yana danna kulle shigarwa, kawai wajibi ne don gyara bangon bango zuwa bango ko keel ta hanyar shirye-shiryen karfe.
Mataki na uku, idan aka gyara bangon farko a mataki na biyu, bayan an shigar da bango na biyu a cikin makullin bango na farko, maimaita mataki na biyu don gyara bangon bangon a bango ko keel.
Mataki na hudu, maimaita mataki na uku
| No | Halaye | Manufar Fasaha | Magana | |||||
| 1 | Bayyanar | Babu guntuwa, fashewa, nau'in gani, delamination, kumfa, m embossing, scratches, datti, rashin kyau yanke, da dai sauransu | EN 649 | |||||
| 2 | Girman mm (23 ℃) | Tsawon | ± 0.20mm | EN427 | ||||
| Fadi | ± 0.10mm | EN427 | ||||||
| Kauri | + 0.13mm, -0.10mm | EN428 | ||||||
| Rage Kauri | ≤0.15 mm | EN428 | ||||||
| wearlay Kauri | ± 0.02 mm | EN429 | ||||||
| 3 | Girman kai mm | ≤ 0.15 | EN427 | |||||
| 4 | Karka mm | ≤ 0.15 | EN427 | |||||
| 5 | Microbevel Cut Angle | 8-15 digiri | ||||||
| Microbevel Yanke Zurfin | 0.60-1.5 mm | |||||||
| 6 | Matsayin kwanciyar hankali bayan bayyanar zafi | 0.12% | EN434 | |||||
| 7 | Curling bayan bayyanar zafi | WPC: ≤0.2 (70 ℃/6Hr) | EN434 | |||||
| SPC: ≤0.2 (80 ℃ / 6Hr) | ||||||||
| 8 | Matsayin sheki | ƙima mara kyau ± 1.5 | Lightmeter | |||||
| 9 | Taber abrasion - Mafi ƙarancin | 0.5mm mai tsayi | ≥5000 hawan keke Matsakaici | EN660 | ||||
| 10 | Uv | 8 zuwa 12g/m2 | ||||||
| 11 | ≥9N | |||||||
| AIKATA SCRATCH UV | SCLEROMETER | |||||||
| 12 | Ayyukan anti-tabo | Iodine | 3 | ASTM 92 an canza shi | ||||
| Mai Brown | 0 | |||||||
| Mustard | 0 | |||||||
| Shoe Yaren mutanen Poland | 2 | |||||||
| Blue Sharpie | 1 | |||||||
| 13 | Ƙaddamar da sassauci | babu fasa | EN435 | |||||
| 14 | Kwasfa Resistance | Tsawon | ≥62.5N/5cm | EN 431 (62.5N / 5cm, 100mm / s) | ||||
| fadi | ≥62.5N/5cm | |||||||
| 15 | Ragowar ciki (matsakaici) mm | ≤0.15 | EN433 | |||||
| 16 | Saurin launi: | ≥7 | ISO105-B2: 2002 | |||||
| 17 | Ƙarfin Kulle | fsmax ≥2 .5N/mm | ISO 24344 | |||||
