Oak High Glossy Laminate Flooring

1. Koyar da ku yadda ake shigar da shimfidar laminate da kanku

Mataki 1: Shirya kayan aiki

Kayan aikin da ake buƙata:

1. Wuka mai amfani;2. Ma'aunin tef;3. Fensir ;4. Hannun gani;5. Spacer;6. Guduma ;7. Sanda mai girgiza

Abubuwan buƙatun:

1. Laminate bene 2. Nail 3. Ƙarƙashin ƙasa

Mataki 2: Shiri kafin shigarwa

1. Laminate bene ya dace da yanayin

Da fatan za a sanya shimfidar laminate da kuka saya a cikin ɗakin don a shimfiɗa aƙalla kwanaki 2 gaba, kuma ku ba su isasshen lokaci don dacewa da faɗaɗa ko raguwar yanayin ɗakin da zafi.Wannan yana hana lanƙwasawa ko wasu matsalolin bayan shigarwa.

2. Cire siket ɗin

Cire layin siket ɗin da ke akwai daga bango ta amfani da mashaya pry.Ajiye sashin a gefe kuma a sake shigar da shi.Ya kamata a sanya laminate mai iyo (irin da aka yi amfani da shi a cikin wannan aikin) a kan wani wuri mai wuya, mai santsi, kamar vinyl.Idan filin da ke akwai ya lalace, cire shi don fallasa benen.

Mataki 3: Fara shigarwa

 Kayayyakin tushe na shigarwa

1. Tushen shigarwa

Shigar da matashin zuwa benen laminate mai iyo.Cire tarkace, ƙusoshi da sauran tarkace daga ƙasa.Kada ku zoba kusa da tsiri, yi amfani da wuka mai amfani don sare su idan an buƙata.Kumfa mai kumfa na iya rage sautin kuma taimakawa bene ya ji daɗaɗɗen ƙarfi da ɗorewa.

2. Tsara shimfidar wuri

Don ƙayyade shugabanci na katako, la'akari da wane bango ne mafi tsayi kuma mafi tsayi.Guji kunkuntar tsiri akan bangon mai da hankali.Tsayin da ke jere na ƙarshe ya kamata ya zama aƙalla faɗin inci 2.Zana hoto akan tazarar inci 1/4 na kowane bango.

Lura: Idan faɗin layin ƙarshe bai wuce inci 2 ba, ƙara wannan faɗin zuwa faɗin dukkan allo ɗin a raba shi da 2, sannan a yanke layuka na farko da na ƙarshe na allunan zuwa wannan faɗin.

3. Yanke aikin

Dangane da shimfidar ku, kuna iya buƙatar yage ko yanke layin farko na alluna a tsayi.Idan kuna amfani da injin lantarki, yanke gefen da aka gama zuwa ƙasa;idan kuna amfani da abin gani na hannu, yanke gefen da aka gama sama.Lokacin yankan alluna, yi amfani da matsi don gyara allunan.

4. Ajiye sarari

Kayayyakin shimfidar shimfidar shimfidar wuri suna buƙatar sarari da za a ɗaure tsakanin bango da katako don barin haɗin haɗin gwiwa na 1/4 inch.Da zarar an shigar da farantin tushe, ba za a iya gani ba.

5. Siyayya jere na farko

Shigar da gefen harshe na katako da ke fuskantar bango (wasu masana'antun sun ba da shawarar cewa ka yanke harshen katakon da ke fuskantar bango).Haɗa katako ɗaya zuwa wani ta hanyar haɗa harsuna da tsagi.Kuna iya haɗa allunan da hannu sosai, ko kuna buƙatar amfani da sandunan ɗaure da guduma a cikin kayan shigarwa don haɗa su tare, ko amfani da tubalan taɓawa don murƙushe haɗin gwiwa tare.Yanke allo na ƙarshe a jere zuwa tsayi (idan yana da tsayin akalla inci 12, ajiye waɗannan ƙananan guda).

6. Sanya wasu layukan

Lokacin shigar da wasu layuka, yi tagulla a cikin layuka da ke kusa da aƙalla inci 12, kamar yadda ake gani akan bangon katako ko bulo.Yawancin lokaci, zaku iya fara sabon layi tare da guntu daga katako mai yanke don ƙare layin da ya gabata.

7. Sanya layi na ƙarshe

A cikin jere na ƙarshe, kuna buƙatar zame katakon cikin wuri a wani kusurwa, sannan a hankali sanya shi a cikin wuri tare da mashaya pry.Tabbatar barin haɗin haɗin faɗaɗa inch 1/4 tsakanin jere na ƙarshe da bango.

8. Yanke firam ɗin ƙofar

Kar a yi ƙoƙarin yanke katako don dacewa da firam ɗin ƙofar.Madadin haka, yi amfani da gani na gefe don yanke firam ɗin ƙofar zuwa kusan 1/16 inch sama da tsayin bene, ta yadda ɗakin allo zai iya zamewa ƙarƙashin firam.Sanya bene mai ɗaure a ƙasa kuma kusa da harsashi.Sanya firam ɗin ƙofar a saman, sannan yanke harsashi zuwa tsayin da ake so.

9. Sake shigar da wasu kayan

Sake shigar da tsiri na ado.Bayan da katako ya kasance a wurin, yi amfani da guduma da ƙusoshi don sake shigar da datsa siket ɗin bene.Sa'an nan kuma, shigar da gyare-gyaren takalmi a kan haɗin gwiwa na fadada kuma yi amfani da madaidaicin canji don haɗa laminate zuwa saman da ke kusa, kamar tayal ko kafet.Kada ku ƙusa shi a ƙasa, amma ku ƙusa shi a kan kayan ado da bango.

2. Laminate bene danna tsarin

Ya haɗa da tsarin danna daban-daban, kawai danna siffar ya bambanta, amma hanyar shigarwa iri ɗaya.

Sunan sa, danna sau ɗaya, danna sau biyu, danna Arc, danna dannawa, danna Unilin, danna Valinge.

3. Sabon tsarin kulle bene na Laminate

12mm Drop danna laminate bene mafi kyawun fa'ida shine Shigarwa da sauri, Ajiye ƙarin 50% shigar lokutan shimfidar katako na laminate.