Tsarin Bamboo Na Halitta

Takaitaccen Bayani:

1) Kayayyaki: 100% Raw Bamboo
2) Launuka: Strand Saƙa
3) Girma: 1840*126*14mm/ 960*96*15mm
4) Abun ciki: 8% -12%
5) Formaldehyde watsi: Har zuwa ma'aunin E1 na Turai
6) Fassarar: Treffert


Cikakken Bayani

Nuni Launi

Shigarwa

Wurin Bamboo Carbonized

Tags samfurin

Kwancen Bamboo Carbonized

Carbonized-Bamboo-Floor

Menene Floor Bamboo A tsaye?

Horizontal Bamboo Floor sabon nau'in kayan ado ne na gini.Yana amfani da bamboo mai inganci na halitta azaman ɗanyen abu.Bayan fiye da matakai 20, ana cire ruwan bamboo puree ruwan 'ya'yan itace, ana matse shi da matsanancin zafin jiki da matsa lamba, sa'an nan kuma ta hanyar fenti da yawa, kuma a karshe ya bushe da hasken infrared..Bamboo bene yana kawo iska mai kore da sabo zuwa kasuwar kayan gini tare da fa'idodinta na halitta da kyawawan kaddarorin da yawa bayan gyare-gyare.Gidan bamboo yana da nau'in nau'in bamboo, sabo da kyan gani, yana ba mutane damar komawa yanayi, kyakkyawa da kuma ladabi.Yana da halaye da yawa.Da farko dai, shimfidar bamboo yana amfani da bamboo maimakon itace, wanda ke da ainihin halayen itace.A cikin aikin sarrafa bamboo, ana amfani da manne mai inganci wanda ya dace da ka'idojin ƙasa don guje wa cutar da formaldehyde da sauran abubuwa ga jikin ɗan adam.Yin amfani da kayan aiki da fasaha na ci gaba, ta hanyar matakai 26 na sarrafa danyen bamboo, yana da kyawawan dabi'u na danyen itacen bene da dorewar yumbun bene.

Horizontal Bamboo ba sabon samfur bane.Ya bayyana a karshen shekarun 1980 a kasar Sin.Tun 1998, fasahar kera bene na bamboo ta girma.A lokacin, abin da aka fitar ya kasance murabba'in murabba'in 300,000 kawai.Saboda fasahar a wancan lokacin ta fi rikitarwa kuma ba ta isa ba, yin amfani da shimfidar bamboo Babu mafita mafi kyau ga matsalolin tsawon rai, damshi da rigakafin asu, don haka ba a ci gaba da bunkasa ta ba.A duniya ta 21, saboda ci gaban fasaha, shimfidar bamboo ya shiga kasuwa da fashewar abubuwa.

Fasahar sarrafa shimfidar bamboo ta bambanta da na kayan bamboo na gargajiya.An yi shi da bamboo mai matsakaici-zuwa-high, wanda ake sarrafa shi ta hanyar zaɓi mai tsauri, yin kayan aiki, bleaching, vulcanization, bushewa, sarrafa kwari, da kariya ta lalata.An kafa shi ta high zafin jiki da kuma high matsa lamba thermosetting glued surface.Dangantakar daffen shimfidar katako.Yana da fa'ida da rashin amfaninsa.Bamboo da benayen itace suna da juriya, juriya, juriya, juriya da wuta.Kaddarorinsa na zahiri sun fi ƙaƙƙarfan benayen katako.Ƙarfin jujjuyawar ya fi ƙaƙƙarfan benayen katako kuma ƙimar raguwa ya fi ƙasa da katako mai ƙarfi.Saboda haka, ba zai fashe ba bayan kwanciya.Babu murdiya, babu nakasu da arching.Duk da haka, bamboo da katako na katako yana da ƙarfi da ƙarfi, kuma ƙafar ƙafa ba ta da dadi kamar katako mai tsayi, kuma bayyanar ba ta bambanta ba kamar katako na katako.Siffar sa siffa ce ta bamboo, launi mai kyau, kuma ta dace da tunanin mutane na komawa yanayi, wanda ya fi shimfidar katakon katako.Sabili da haka, farashin kuma yana tsakanin katako mai ƙarfi da katako na katako.

Tsarin

bamboo-flooring-contructure
bamboo-types

Tsarin Bamboo na Halitta

natural-bamboo-flooring

Wurin Bamboo Carbonized

Carbonized-Bamboo-Flooring

Wurin Bamboo Carbonized Na Halitta

natural-Carbonized-Bamboo-Floor

Amfanin Bamboo Flooring

BAMBOO-FLOORING-ADVANTAGE

Cikakkun Hotuna

18mm-Bamboo-Flooring
20mm-Bamboo-Flooring
15mm-Bamboo-Floor-Natural
Bamboo-Floor-Natural

Bayanan Fasaha na Bamboo Flooring

1) Kayayyaki: 100% Raw Bamboo
2) Launuka: Strand Saƙa
3) Girma: 1840*126*14mm/ 960*96*15mm
4) Abun ciki: 8% -12%
5) Formaldehyde watsi: Har zuwa ma'aunin E1 na Turai
6) Fassarar: Treffert
7) Manko: Dinea
8) Haskaka: Matt, Semi haske
9) Hadin gwiwa: Harshe & Tsagi (T&G) danna;Unilin+Drop danna
10) Ikon samarwa: 110,000m2 / wata
11) Takaddun shaida: Takaddun shaida CE , ISO 9001:2008, ISO 14001:2004
12) Shiryawa: Fina-finan filastik tare da akwatin kwali
13) Lokacin Bayarwa: A cikin kwanaki 25 bayan an karɓi kuɗin gaba

Danna Tsarin Akwai

A: T&G Danna

1

T&G LOCK BAMBOO-Bamboo Florinig

2

Bamboo T&G - Bamboo Florinig

B: Drop (gajeren gajere)+ danna Unilin (gefen tsayi)

drop-Bamboo-Florinig

sauke Bamboo Florinig

unilin-Bamboo-Florinig

Bamboo Florinig

Jerin fakitin shimfidar bamboo

Nau'in Girman Kunshin Babu Pallet/20FCL Farashin 20FCL Girman Akwatin GW NW
Carbonized Bamboo 1020*130*15mm 20pcs/ctn 660 ctns/1750.32 sqm 10 plt, 52ctns/plt, 520ctns/1379.04 sqms 1040*280*165 28kg 27kg
1020*130*17mm 18pcs/ctn 640 ctns/1575.29 sqm 10 plt, 52ctns/plt, 520ctns/1241.14 sqms 1040*280*165 28kg 27kg
960*96*15mm 27pcs/ctn 710 ctns/ 1766.71 Sqm 9 plt, 56ctns/plt, 504ctns/1254.10 sqms 980*305*145 26kg 25kg
960*96*10mm 39pcs/ctn 710 ctns/ 2551.91 sqm 9 plt, 56ctns/plt, 504ctns/1810.57 sqms 980*305*145 25kg 24kg
Strand Woven Bamboo 1850*125*14mm 8pcs/ctn 672 ctn, 1243.2m² 970*285*175 29 kg 28 kg
960*96*15mm 24pcs/ctn 560 ctn, 1238.63sqm 980*305*145 26 kg 25 kg
950*136*17mm 18pcs/ctn 672ctn, 1562.80sqm 970*285*175 29 kg 28kg

Marufi

Dege Brand Packaging

DEGE-BAMBOO-FLOOR
DEGE-Horizontal-Bamboo-Floor
DEGE-BAMBOO-FLOORING
DEGE-Carbonized-Bamboo-Floor
bamboo-flooring-WAREHOUSE

Babban Marufi

Strand-Woven-Bamboo-Flooring-package
carton-bamboo-flooring
bamboo-flooring-package
bamboo-flooring-cartons

Sufuri

bamboo-flooring-load
bamboo-flooring-WAREHOUSE

Tsarin Samfur

bamboo-flooring-produce-process

Aikace-aikace

strand-woven-bamboo-flooring
brown-Strand-Woven-Bamboo-Flooring
Carbonized-Heavy-Bamboo-Flooring
natural-Strand-Woven-Bamboo-Flooring
bamboo-flooring-for-indoor
champagne-Heavy-Bamboo-Flooring
dark-Strand-Woven-Bamboo-Flooring
15mm-Strand-Woven-Bamboo-Flooring
flate-Heavy-Bamboo-Flooring

  • Na baya:
  • Na gaba:

  • about17Yadda ake shigar da bene na bamboo (cikakken sigar)

      Bamboo itace bene shigarwabai bambanta da daidaitattun ka'idodin katako na katako ba.Ga masu gida, dalili na farko don yin shigar da katako na bamboo shine don adana kuɗi.Ana iya shigar da shi a cikin rabin farashin ta hanyar yin shi da kanka.Shigar da bene na bamboo na iya zama aikin karshen mako mai sauƙi.
    Umarni na asali:Kafin shigar da kowane bene, yakamata ku tabbatar da cewa wurin aiki da bene na ƙasa sun cika buƙatun da ake buƙata.Muhimman matakai na shigarwa suna faruwa kafin saka a cikin bamboo bene. Ga wasu jagororin:
    Mataki na farko a cikin shigarwar bene na bamboo shine tabbatar da ƙasan ƙasa shine:
    √ Tsarin tsari
    √ Tsaftace: Tsaftace kuma babu tarkace, kakin zuma, maiko, fenti, sealers, da tsofaffin adhesives da sauransu.
    √ Busasshe: Dole ne ƙasa ta kasance bushe duk shekara, kuma
    √ Level Adhesives ba sa haɗi da kyau tare da ƙazantattun benen ƙasa kuma a ƙarshe za su haifar da lalacewa, idan ɗanɗano.Idan ba a daidaita ba, shimfidar bamboo za ta yi kururuwa lokacin tafiya.
    √ Cire duk wani tsohon ƙusoshi ko ma'auni daga kayan bene na baya.
    √ Yi nazarin kowane katakon bene don daraja, launi, gamawa, inganci da lahani.
    √ Auna kasa kuma a raba da adadin alluna.
    √ Sanya shimfidar bene don zaɓin gani.
    Matsayin da hankali na launi da hatsi zai inganta kyawun bene da aka gama.
    √ Dole ne a adana kayan ƙasa a wurin shigarwa aƙalla sa'o'i 24-72 a baya.Wannan yana ba da damar shimfidar ƙasa don daidaitawa zuwa zafin jiki da zafi.
    √ Kada a adana kai tsaye akan siminti ko kusa da bangon waje.
    √ Lokacin siyan shimfidar ƙasa, ƙara 5% zuwa ainihin hoton murabba'in da ake buƙata don yanke izini.
    √ Idan kana shigar da bene na bamboo a kan labari na biyu, sannan kafin amfani da nailer/stapler, da farko cire kayan hasken wuta daga rufin da ke ƙasa.Stapler yana sanya matsin lamba akan joists kuma yana iya sassauta abubuwan da aka ɗora sama a ƙasa.
    √ Duk wani aiki da ya shafi ruwa ko danshi yakamata a yi shi kafin shigar da katakon bamboo.Ana ba da shawarar zazzabin ɗaki na 60-70F da yanayin zafi na 40-60%.
    Muhimmiyar Bayani:Gidan katako na bamboo yakamata ya zama abu na ƙarshe da aka girka don kowane sabon aikin gini ko gyarawa.Hakanan, shigar da bene bisa ga jagororin masana'anta don kare garantin ku.
    Kayayyakin Shigarwa:
    √ Ma'aunin Tef
    √ Handsaw (maganin wutar lantarki shima yana taimakawa)
    √ Tapping block (yankin da aka gyara)
    √ itace ko filastik sarari (1/4 ″)
    √ Crow bar ko ja
    √ Guduma
    √ layin alli
    √ Fensir
    Don shigar da ƙusa, za ku kuma buƙaci:
    √ bindigar ƙusa da ta dace
    √ Taswirar aikace-aikacen ƙusa Don shigar da manne, kuna buƙatar:
    √ Amintaccen mannen bene
    √ Tafarnuwa
    Don shigarwa na iyo, za ku kuma buƙaci:
    √ 6-mil poly film foam underlayment
    √ PVAC manne
    √ Poly tef ko tef
    Umarnin shigarwa kafin shigarwa:
    √ Don sanya shimfidar bene ya yi daidai da ƙasa, ya kamata a yanke ƙwanƙolin kofa ko kuma a fitar da su.
    √ Yayin da itace ke fadadawa tare da karuwa a matakin danshi, ya kamata a bar sararin fadada 1/4 "tsakanin bene da duk bango da abubuwa na tsaye (kamar bututu da kabad).Za'a rufe wannan yayin sake yin gyare-gyaren tushe a kusa da ɗakin.Yi amfani da tazarar itace ko filastik yayin shigarwa don kula da wannan sararin faɗaɗa.
    √ Koyaushe yi amfani da shingen bugawa da guduma don jan katako tare.Ya kamata a yi amfani da shingen bugun gaba da harshe kawai, ba a kan tsagi na katako ba.
    √ Koyaushe fara kowane layi daga gefen ɗakin.
    √ Ana iya amfani da hankaka ko sandar ja don rufe mahaɗin ƙarshen kusa da bango.
    √ A kula kada a lalata gefen bene.
    Farawa:Don mafi kyawun bayyanar, sau da yawa ana shimfiɗa bene na katako na bamboo daidai da bango mafi tsayi ko bangon waje, wanda yawanci ya fi dacewa kuma ya dace da shimfiɗa layin aiki madaidaiciya.Jagoran katako ya kamata ya dogara ne akan tsarin dakin da wuraren shiga da tagogi.ƴan layuka (ba manne ko ƙusoshi) na iya zama bushe-dage farawa kafin fara shigarwa don tabbatar da shawarar shimfidawa da layin aiki.Idan dakin yana shirye don shigarwa, kuma duk kayan aiki da kayan aiki suna nan, DIYer tare da wasu kwarewa na bene na iya sa ran shigar da kimanin ƙafa 200 a rana.Hanyar Shigarwa: Akwai hanyoyi gama gari guda uku don shigar da bene na itacen gora: Naildown, gluedown da iyo mai iyo.
    1. KUNSHI KO SIRRI:A cikin wannan hanyar, bene na bamboo yana 'a ɓoye' an ƙusa shi zuwa wani bene na itace.Hanya ce ta al'ada ta shigar da katako na bamboo ta amfani da kusoshi ko ma'auni.Za'a iya shigar da duk ƙaƙƙarfan benaye da yawa injiniyoyi ta wannan hanya.Dole ne a yiwa maƙallan bene (biyoyin goyan bayan bene) alama don jagorantar tsarin shigarwa.Har ila yau, ya kamata a sanya alamar wuri na joists na ƙasa a kan takarda mai ji tare da layin alli.Waɗannan alamomin za su gano inda ya kamata a kora kusoshi da ƙusoshi don yin ƙaƙƙarfan haɗi tare da benen ƙasa.Ana dunƙule kusoshi ko ƙusoshin a kusurwa ta cikin harshe kuma yanki na gaba yana ɓoye su.Wannan shine dalilin da ya sa ake kiransa 'makãho ko ƙusa a asirce.'Ƙashe kowane allo kowane 8 " kuma tsakanin 2" na kowane ƙarshen.Da zarar an sanya layuka masu farawa, ya kamata a ƙusa katako na gaba kai tsaye a sama da harshe a kusurwa 45o.Ana iya buƙatar ƙusa fuska a ƙofofin ƙofa ko wurare masu matsatsun inda ƙusa ba zai dace ba.Layukan biyun na ƙarshe kuma dole ne a ƙusa su fuska ɗaya.Yakamata a kiyaye ido mai kyau akan ƙusa / matsananciyar shiga.
    2. NUFI:Wannan hanyar ta ƙunshi ɗora manne da benen bamboo zuwa wani bene na ƙasa.Ana shigar da bene mai mannewa a ƙasa kamar na tile na bene.Ana iya amfani da shi don shigarwa a kan ƙananan bene na kankare da kuma a kan plywood.Za'a iya shigar da shimfidar ƙasan injiniya ta amfani da hanyoyin saukar da manne iri ɗaya.Za a iya manna shimfidar bamboo ƙasa ta amfani da mannen bene mai jure danshi (musamman nau'in urethane).Karanta umarnin manne a hankali don daidaitaccen girman tafki da saita lokacin mannewa.Bai kamata a yi amfani da mannen ruwa ba don wannan dalili.Har ila yau, kada ku yi amfani da hanyar "rigakafi" ko "layin kwance" na shigarwa.Fara da bangon waje kuma yada gwargwadon abin da ake iya rufe shi da bene a cikin awa 1.Bayan an yi amfani da mannen a ƙasan ƙasa tare da tawul, ya kamata a sanya katangar benayen bamboo nan da nan tare da tsagi yana fuskantar bango.Bada izinin isassun iskar ƙetare yayin aikin.Tabbatar cewa bene har yanzu yana daidaita kuma a yi hankali kada a bar shimfidar bene ya motsa akan rigar manne.Yi amfani da rigar datti don cire duk wani manne da ya hau saman bene nan da nan.Yi tafiya a kan ƙafar ƙafar ƙafa a cikin minti 30 na shimfiɗa ƙasa don tabbatar da haɗin gwiwa tare da m.Katakan bene a kan iyakar layin na iya buƙatar nauyi don wannan haɗin gwiwa.
    3. BAN KWANA:Wani bene mai iyo yana haɗe da kansa ba zuwa bene na ƙasa ba.An shigar da shi akan nau'ikan abin da ke ƙarƙashin matashin matashin kai.Wannan hanyar ta dace da kowane bene na ƙasa kuma ana ba da shawarar musamman don zafi mai haske ko ƙasa da shigarwa.Ya kamata a yi la'akari da samfuran injiniyoyi mafi fa'ida ko giciye don yin iyo.Wannan hanya ta ƙunshi haɗa harshe da haɗin gwiwar katakon katako na bamboo tare a kan wani ƙasa.Fara layin farko tare da tsagi zuwa bango.Manna ƙarshen haɗin gwiwa na jere na farko ta hanyar amfani da manne zuwa ƙasan tsagi.Sanya layuka na gaba na bene ta hanyar shafa manne zuwa gefe da ƙarshen haɗin gwiwa da dacewa da katako tare da toshewa.
    Kulawar Bayan Shigarwa:
    √ Cire sararin sararin samaniya da sake shigar da tushe da/ko gyare-gyare na kwata don rufe sararin fadada.
    √Kada ka yarda da zirga-zirgar ƙafa ko kayan ɗaki masu nauyi a ƙasa na tsawon awanni 24 (idan manne-ƙasa ko yana iyo).
    √ Ku zubar da ƙura ko goge ƙasa don cire duk wani datti ko tarkace.

    spec

     

    about17Dutsen matakala

    20140903092458_9512 20140903092459_4044-(1) 20140903092459_4044 20140903092459_6232

    20140903092500_0607

    20140903092500_3732

    20140903092500_6701

    about17Na'urorin haɗi na bene na bamboo na yau da kullun

    4 7 jian yin

    20140904084752_2560

    20140904085502_9188

    20140904085513_8554

    20140904085527_4167

    about17Na'urorin bamboo masu nauyi

    4 7 jian T ti

    20140904085539_4470

    20140904085550_6181

    Halaye Daraja Gwaji
    Yawan yawa: +/- 1030 kg/m3 EN 14342:2005 + A1:2008
    Brinell taurin: 9.5 kg/mm² EN-1534:2010
    Abun ciki: 8.3% a 23 ° C da 50% zafi dangi EN-1534:2010
    Ajin fitarwa: Class E1 (LT 0,124 mg/m3, EN 717-1) TS EN 717-1
    Bambance-bambancen kumburi: 0.17% pro 1% canji a cikin abun ciki na danshi EN 14341:2005
    Juriyar abrasion: 16,000 juya EN-14354 (12/16)
    Matsawa: 2930 kN/cm2 TS EN ISO 2409
    Juriya na tasiri: 6 mm ku Saukewa: EN-14354
    Kaddarorin wuta: Class Cfl-s1 (EN 13501-1) TS EN 13501-1
    Ku rubuta sakonku anan ku aiko mana

    KAYANE masu alaƙa