Menene rufin karya na PVC?
Pvc rufin karya yana ɗaya daga cikin kayan rufin da aka samar a cikin 'yan shekarun nan.Pvc rufi yana da buɗaɗɗen filin hangen nesa, samun iska, da kuma iyawar iska.Layukan sa suna da kyau kuma suna da kyau, kuma yadudduka a bayyane suke.Ya ƙunshi salon zamani mai sauƙi kuma bayyananne.Yana da sauƙi don shigarwa da sake haɗawa.Babban samfurin sananne a kasuwar kayan ado.
Za a iya raba rufin karya zuwa rufin aluminum da rufin pvc.
Pvc rufi yana extruded, kuma tsarin shigarwa shine tsari na musamman na keel.Hanyar shigarwa yana kama da gusset na yau da kullun, mai sauƙi da dacewa, kuma ya dace da kayan ado na ciki (ana iya tsara keel tare da lambar katin kariya ta iska).
Don shigar da rufin pvc daban-daban na wpc, zaku iya zaɓar tsayi daban-daban da tazara, ɗaya babba da ɗaya ƙasa, ɗaya mara nauyi da mai yawa, tare da haɗin launi mai ma'ana, don ƙirar tana canzawa koyaushe, kuma ana iya tsara tasirin ado daban-daban.A lokaci guda, saboda rufin yana da kyau, fitilu, tsarin kwantar da iska, da kayan aikin kashe wuta za a iya sanya su a cikin rufin don cimma daidaito da cikakkiyar tasirin gani.
Fasin murabba'in aluminum yana da sauƙi don shigarwa, kuma kulawa kuma yana da dacewa sosai.Saboda kowane fasinja na murabba'in aluminium ya bambanta, ana iya shigar da shi kuma a rarraba shi yadda ya kamata ba tare da kayan aiki na musamman ba, wanda ya dace da kulawa da kulawa.
Siffofin:
Ana amfani da shi don ayyukan ɓoye a wuraren jama'a tare da jama'a da yawa, wanda ya dace da yanayin iska, shaye-shaye, da kuma zubar da zafi.A lokaci guda, zai iya rarraba hasken daidai kuma ya sa sararin samaniya ya zama fili da haske.Ana amfani da shi sosai a cikin hanyoyin karkashin kasa, tashoshin jirgin kasa masu sauri, tashoshin jirgin kasa, filayen jirgin sama, manyan kantunan kasuwanci, wurare, wuraren shakatawa, dakunan wanka na jama'a, otal-otal, gidajen cin abinci na makaranta, wuraren gini da sauran wuraren bude ido.
Launuka masu yawa
Girman
Cikakken Hoton
Ƙayyadaddun bayanai
Sunan alama | DEGE |
Sunan abu | Rufi na cikin gida |
Samfura | Rufin Wpc |
Girman | 90*50mm |
Kayan abu | WPC |
Tsawon | 3000mm |
Launi | Zinariya, Mahogany, Teak, Cedar, Ja, gay na gargajiya, baki |
Mafi ƙarancin oda | 350 murabba'in mita |
Kunshin | Standard canton |
Ruwan sha | Kasa da 1% |
Matakin hana wuta | Matakin B |
Lokacin biyan kuɗi | 30% T / T a gaba, saura 70% biya kafin kaya |
Lokacin bayarwa | A cikin kwanaki 30 |
Magana | Ana iya canza launi da girman bisa ga buƙatarku |
Aikace-aikace | Cikin gida |
Siffofin | 1) Matsayin kwanciyar hankali, tsawon rai, jin daɗin yanayi |
2) Juriya ga rubewa da tsagewa | |
3) Tsaya akan kewayon zafin jiki mai faɗi, mai jure yanayin yanayi | |
4) Juriya da danshi, ƙananan harshen wuta | |
5) Babban tasiri mai juriya | |
6) Fitaccen dunƙule da riƙe ƙusa | |
7) Abokan muhalli, sake yin amfani da su | |
8) Broad kewayon gama da bayyanar | |
9) Sauƙaƙan samarwa da sauƙi ƙirƙira | |
10) Ba ya ƙunshi sinadarai masu guba ko abubuwan kiyayewa |
Sunan alama | DEGE |
Sunan abu | Rufin WPC |
Samfura | |
Girman | 90*50mm |
Kayan abu | WPC |
Tsawon | 3000mm |
Launi | Zinariya, Mahogany, Teak, Cedar, Ja, gay na gargajiya, baki |
Mafi ƙarancin oda | 350 murabba'in mita |
Kunshin | Standard canton |
Ruwan sha | Kasa da 1% |
Matakin hana wuta | Matakin B |
Lokacin biyan kuɗi | 30% T / T a gaba, saura 70% biya kafin kaya |
Lokacin bayarwa | A cikin kwanaki 30 |
Magana | Ana iya canza launi da girman bisa ga buƙatarku |
Aikace-aikace | Cikin gida |
Siffofin | 1) Matsayin kwanciyar hankali, tsawon rai, jin daɗin yanayi |
2) Juriya ga rubewa da tsagewa | |
3) Tsaya akan kewayon zafin jiki mai faɗi, mai jure yanayin yanayi | |
4) Juriya da danshi, ƙananan harshen wuta | |
5) Babban tasiri mai juriya | |
6) Fitaccen dunƙule da riƙe ƙusa | |
7) Abokan muhalli, sake yin amfani da su | |
8) Broad kewayon gama da bayyanar | |
9) Sauƙaƙan samarwa da sauƙi ƙirƙira | |
10) Ba ya ƙunshi sinadarai masu guba ko abubuwan kiyayewa |
Amfani
Tsarin samarwa
Aikace-aikace
Aikin
Koyar da ku yadda ake Sanya Bidiyon Rufin WPC
35mm WPC Frames Layukan da ake amfani da su don yin manyan firam ɗin hoto akan bango, rufi da bangon bango
Na'urorin haɗi
Tsarin shigarwa
1. Gyara albarku da keel
2. Saka wpc rufi wucewa ta wani sashe na keel
3. Ninka sauran ƙarshen keel a cikin rufin wpc
4. Maimaita na uku
Yawa da Girman zaɓi don Rufi da Na'urorin haɗi
Dauki 5cm keel rufi da wpc rufi 40 * 45mm a matsayin misali
Ƙididdigar adadin rufin 1M2:
Yawan Rufin WPC = 1/(0.04M+0.045M)=11.76M
Keel Quantity = 1.2 mita keel don 1 murabba'in rufi
Lura:
0.04 mita shine nisa na rufin wpc,
Mita 0.045 shine nisa tsakanin keels
No | Halaye | Manufar Fasaha | Magana | |||||
1 | Bayyanar | Babu guntuwa, fashewa, nau'in gani, delamination, kumfa, m embossing, scratches, datti, rashin kyau yanke, da dai sauransu | EN 649 | |||||
2 | Girman mm (23 ℃) | Tsawon | ± 0.20mm | EN427 | ||||
Fadi | ± 0.10mm | EN427 | ||||||
Kauri | + 0.13mm, -0.10mm | EN428 | ||||||
Rage Kauri | ≤0.15 mm | EN428 | ||||||
wearlay Kauri | ± 0.02 mm | EN429 | ||||||
3 | Girman kai mm | ≤ 0.15 | EN427 | |||||
4 | Karka mm | ≤ 0.15 | EN427 | |||||
5 | Microbevel Cut Angle | 8-15 digiri | ||||||
Microbevel Yanke Zurfin | 0.60-1.5 mm | |||||||
6 | Matsayin kwanciyar hankali bayan bayyanar zafi | 0.12% | EN434 | |||||
7 | Curling bayan bayyanar zafi | WPC: ≤0.2 (70 ℃/6Hr) | EN434 | |||||
SPC: ≤0.2 (80 ℃ / 6Hr) | ||||||||
8 | Matsayin sheki | ƙima mara kyau ± 1.5 | Lightmeter | |||||
9 | Taber abrasion - Mafi ƙarancin | 0.5mm mai tsayi | ≥5000 hawan keke Matsakaici | EN660 | ||||
10 | Uv | 8 zuwa 12g/m2 | ||||||
11 | ≥9N | |||||||
AIKATA SCRATCH UV | SCLEROMETER | |||||||
12 | Ayyukan anti-tabo | Iodine | 3 | ASTM 92 an canza shi | ||||
Mai Brown | 0 | |||||||
Mustard | 0 | |||||||
Shoe Yaren mutanen Poland | 2 | |||||||
Blue Sharpie | 1 | |||||||
13 | Ƙaddamar da sassauci | babu fasa | EN435 | |||||
14 | Kwasfa Resistance | Tsawon | ≥62.5N/5cm | EN 431 (62.5N / 5cm, 100mm / s) | ||||
fadi | ≥62.5N/5cm | |||||||
15 | Ragowar ciki (matsakaici) mm | ≤0.15 | EN433 | |||||
16 | Saurin launi: | ≥7 | ISO105-B2: 2002 | |||||
17 | Ƙarfin Kulle | fsmax ≥2 .5N/mm | ISO 24344 |