3 Tsarin Injiniya Layer
Tsarin Injiniya Multilayer
Amfanin Falowar Injiniya
Ƙayyadaddun bayanai
Nau'in shimfida | An riga an gama | Nau'i | Maple/Hard Maple |
Launi | Brown | Inuwa | Inuwa Matsakaici/Matsakaici |
Nau'in Ƙarshe | Urethane | Matsayin sheki | Low-Gloss |
Aikace-aikace | Mazauni | Nau'in Core | Multi-Ply |
Bayanan martaba | Harshe & Tsagi | Nau'in Edge | Jinin Faransa |
Matsakaicin Tsawon (a.) | 48 | Mafi ƙarancin Tsawon (a.) | 20 |
Matsakaicin tsayi (a.) | 33 | Nisa (a.) | 5 |
Kauri (a.) | 0.55 | Radiant Heat Mai jituwa | No |
Kasa da Daraja | Ee | Shigarwa | Mai iyo, Manne Kasa, Ƙashe Ƙashe, Ƙaƙƙarfan Ƙaƙwalwa |
Takaddun shaida | KARB II | Kaurin Layer (mm) | 3 |
Ƙarshen Sama | Bacin rai, Hannu | Garantin Kammala (a cikin shekaru) | shekaru 25 |
Garanti na Tsarin (a cikin shekaru) | Shekaru 25 | Ƙasar Asalin | China |
Girman Marufi (inci) | Tsayi: 4.75 Tsawo: 84 Nisa: 5 | Girman samfur | Tsayi: 9/16" Tsawon: 15 3/4 - 47 1/4" Nisa: 5" |
Sqft / Akwati | 17.5 | Shawara 65 | Hankali mazauna California |
Tarihin ginin itacen oak na Turai
Injin itacen oak na Turai ya samo asali ne a cikin Amurka da aka ƙirƙira a cikin 1980s.Samfurin yana da tattalin arziki, yana kula da asalin itace kuma yana da juriya mai kyau.Koyaya, ya daɗe ya mamaye babban matsayi na kasuwar kayan bene na duniya kuma yanzu yana da kaso 1/3 na kason katako na katako.
Na gaba, bari mu gabatar da dalla-dalla da sabunta fasaha na shimfidar itacen oak:
1 Juriya na saman:
A farkon matakin ci gaba, ba shi da juriya.Saboda fentin UV, saman bene ba ya jurewa kuma yana da sauƙin karce.Yanzu tare da haɓaka fasahar fenti UV, bayan ƙara wakili mai jure lalacewa don fenti, fenti ya zama kayan haɗin gwiwa.Bugu da ƙari na wakili mai jurewa, Bari Injiniya FLOORING ya sami fim mai kariya, kuma an ƙara yawan jujjuyawar juriya daga juyi 500 zuwa 4000, wanda ke adana farashin kulawa sosai a cikin lokaci na gaba.
2 Girma:
Kafin, katakon shimfidar bene yana da zaɓin girman guda ɗaya, yanzu akwai zaɓuɓɓuka da yawa na girman, zaku iya zaɓar wanda ya dace gwargwadon girman ɗakin, misali Big Plank: 2200 * 190mm * 22mm / 18mm / 15mm 1900 * 190 * 14mm /18mm;Tsakanin Tsaki: 1220 * 165 * 14mm / 12mm;Small Plank:
Daga tsarin: 910 * 127 * 12mm / 14mm, 450 * 90 * 15mm, 450 * 75 * 15mm;510*92*15mm
3 Shigarwa:
Saboda ƙayyadaddun makullin a farkon shimfidar itacen oak na Turai, kawai T & G makullin za a iya amfani da shi, wanda ke haifar da buƙatar manne don shigarwa, wanda ba kawai yanayin muhalli ba, amma kuma yana ɗaukar lokaci mai tsawo.Tare da ci gaban tattalin arziki, farashin aiki yana ƙaruwa, kuma mutane suna mai da hankali ga muhalli.Haihuwar kulle, UNILIN, VALINGE da I4F, sun rage farashin shigarwa na ƙasa sosai.Mai ba da gudummawa ga saurin haɓakar masana'antar shimfidar ƙasa gabaɗaya
4. Tsarin:
Tsarin Multi-Layer na ingantattun dubawa shine kawai Veneer da allon madaidaicin Layer Layer.
Yanzu akwai nau'o'in kayan aiki masu yawa, abubuwan amfani da kayan aiki daban-daban na tsarin, irin su
Multilayer board substrate + laminate bene surface (Wear-resistant Layer da melamine na ado takarda);
Multilayer allo substrate + HPL;
SPC + Wuta
Nau'in Zane
Danna Nau'in
T&G Injiniya Flooring
Unilin Injiniya Flooring
Nau'in Ƙarshe
Wuraren da aka goge da hannu
Wuraren Wuraren Ƙarƙashin Ƙarƙashin Ƙarƙashin Wuta
Ƙwararren Ƙwararren Ƙwararren Ƙasa
Babban darajar
Injin ABCD dabe
CDE injin daskarewa
ABC injin dabe
AB injiniyan dabe
Yadda Ake Bambance Makarantun Injiniya Injiniya
1. Bambance-bambancen Hanya
Darasi A:ba a yarda kulli;
Darasi B:Yawan kullin kowane pc: 1-3pcs da diamita na kullin wanda launinsa baƙar fata yana cikin 8mm da diamita na kullin wanda launi ya kusan daidai da veneer yana cikin 10mm;
Darasi C:Yawan kullin kowane pc: 1-3pcs da diamita na kullin wanda launinsa baƙar fata yana cikin 20mm da diamita na kullin wanda launi ya kusan daidai da veneer yana cikin 25mm;Bugu da kari, an ba da izinin 20% na farin gefen farar nisa kuma an yarda da bambancin launi;
Darasi D:Yawan kullin kowane pc: 1-3pcs da diamita na kullin wanda launinsa baƙar fata yana cikin 30mm da diamita na kullin wanda launi ya kusan daidai da veneer ba shi da iyaka;Bugu da ƙari, tsayin tsage yana cikin 30cm kuma an yarda da bambancin launi mai tsanani;
2.Kashi
Matsayin ABC:Kashi na AB: 15%, Kashi na C: 85%;
Darasi na ABCD:Kashi na AB: 20%, Kashi na C: 50%, Kashi na D: 30%
3.Hoto
Takaddun shaida
Tsarin Samfur
Kasuwar mu
Aikace-aikace
Aikin 1
Aikin 2
Yadda Ake Sanya Wuraren Katako Na Injiniya
MATAKI 1.
Tsaftace ƙasa, felu simintin da ke fitowa daga ƙasa, sannan a yi amfani da tsintsiya don tsaftace shi.Yashi da ciminti slurry a ƙasa dole ne a tsaftace su sosai, in ba haka ba zai yi rustle bayan shigarwa!
Bayani:
Za'a iya shimfiɗa bene kawai lokacin da danshi na ƙasa ya kasance ƙasa da 20, in ba haka ba, bene zai zama m da arched bayan kwanciya!
MATAKI NA 2.
Bayan an tsabtace ƙasa duka, yada fim ɗin filastik na bakin ciki, wanda ya kamata a rufe shi gaba ɗaya, kuma a haɗa haɗin gwiwa don raba ƙasa da ƙasa.
MATAKI NA 3.
Bayan shimfida fim ɗin filastik, sanya fim ɗin ciyawa na musamman a ƙasa.Hakanan ya kamata a daidaita shi kuma a shimfiɗa shi da ƙarfi.Zai fi kyau a sami mutane biyu su taimaka.
MATAKI NA 4.
Bayan ya shimfiɗa ciyawa, mai sakawa ya fitar da benaye da yawa daga cikin akwatin ya baje su duka a ƙasa, ya zaɓi bambancin launi, ya sanya babban bambancin launi a ƙarƙashin gado da kabad, ya shimfiɗa shi a kan fili mai launi iri ɗaya. bambanci.
MATAKI NA 5.
Fara shigarwa na yau da kullun na bene.Maigidan shigarwa yana yanke benaye ɗaya bayan ɗaya, sannan ya girka su kamar yadda aka nuna a cikin adadi mai zuwa.Yi amfani da guduma kawai don ƙarfafa tsakanin bene da ƙasa.Maigidan shigarwa yana da ƙwarewa sosai kuma saurin shigarwa yana da sauri sosai!Bar nisa na kusan 1 cm tsakanin bene da bango.
MATAKI NA 6.
Idan kasan ya yi tsayi da yawa, sanya shi a kan mai yankan ƙasa kuma yanke shi zuwa tsayin da ake bukata.Ba za a iya sanya injin yankan kai tsaye a kan fale-falen ƙasa ba.Domin kada a fasa ramin, sai a sanya kwali mai kauri a kasa.
MATAKI NA 7.
Gabaɗaya, shigar da bene ana aiwatar da shi ta hanyar mutane 2, jimlar kusan murabba'in murabba'in 35, kuma ya ɗauki awanni 6 kawai.
MATAKI NA 8.
Bayan an shigar da ƙasa, sanya maɓuɓɓugar ruwa tsakanin bene da bango.Ruwan bazara zai fadada kuma yayi kwangila tare da zafi.Yi amfani da kayan aikin ƙarfe na musamman don saka shi cikin rata.
MATAKI NA 9.
Don shigar da sutura, kana buƙatar gyara sutura a kan bango tare da ƙusoshi, da kuma rufe sutura da bango tare da gilashin gilashi.
MATAKI NA 10.
Kasa da siket duk an girka, kalar su har yanzu sun dace sosai, kuma sabon falon da aka girka shima yayi kyau sosai, don haka filin da aka girka ba shi da sauti.
Daban-daban Injiniya Daban Daban Ƙarƙashin katako, Hanyoyin Shigarwa
1.Classic Series Injiniya Flooring
2.Herringbone Series Injiniya Flooring
3.Chevron Series Injiniya Flooring
Kariyar Wuta: | TS EN 13501-1 Dn s1 |
Ƙarfafa Ƙarfafawa: | EN ISO 10456 da EN ISO 12664 Sakamakon 0.15 W / (mk) |
Abubuwan Danshi: | TS EN 13183-1 Bukatun: 6% zuwa 9% Matsakaicin Sakamako: <7% |
Ƙarfafa Ƙarfafawa: | EN ISO 10456 / EN ISO 12664 Sakamako 0.15 W / (mk) |
Sakin Formaldehyde: | Darasi E1 |TS EN 717 - 1: 2006 Sakamakon 0.014 mg / m3 Bukatun: Kasa da 3 ppm Sakamakon: 0.0053 ppm |
Juriya Zamewa: | Gwaji zuwa BS 7967-2: 2002 (Gwajin Pendulum a cikin ƙimar PTV) Sakamakon Ƙarshe mai mai: DRY (66) RASHIN RASHIN RISK (29) MATSAYI RISK Babu wani buƙatu na yanzu don jure juriya a cikin ci gaban zama. |
Dacewar amfani: | Ya dace don amfani tare da dumama ƙasa a aikace-aikacen kasuwanci da na zama |
Tasiri daga danshi: | Tsarin katako zai fadada idan an fallasa shi zuwa yanayin da ke ƙara yawan danshi fiye da 9%.Ƙarƙashin katako zai yi kwangila idan yanayin da ake ciki ya rage yawan danshin samfurin da ke ƙasa da 6%.Duk wani bayyanar da ke wajen waɗannan sigogi zai lalata aikin samfurin |
Isar da Sauti: | Ƙarƙashin katako a kan kansa zai ba da taimako don rage sautin sauti, amma ginawa na dukan bene da kewaye da ke taimakawa wajen tasiri da sautin iska.Don ingantacciyar ƙima yakamata a ɗauki ƙwararren injiniya aiki don ƙididdige yadda ake samun ingantaccen sakamako. |
Abubuwan thermal: | Ƙaƙƙarfan katako na katako yana ba da dabi'u masu zuwa: 20mm kauri allon tare da 4mm ko 6mm saman Layer zai rasa 0.10 K/Wm2 15mm allon tare da 4mm ko 6mm saman Layer zai rasa 0.08 K/Wm2 |