3 Tsarin Injiniya Layer
Tsarin Injiniya Multilayer
Amfanin Falowar Injiniya
Ƙayyadaddun bayanai
| Nau'in shimfida | An riga an gama | Nau'i | Maple/Hard Maple |
| Launi | Brown | Inuwa | Inuwa Matsakaici/Matsakaici |
| Nau'in Ƙarshe | Urethane | Matsayin sheki | Low-Gloss |
| Aikace-aikace | Mazauni | Nau'in Core | Multi-Ply |
| Bayanan martaba | Harshe & Tsagi | Nau'in Edge | Jinin Faransa |
| Matsakaicin Tsawon (a.) | 48 | Mafi ƙarancin Tsawon (a.) | 20 |
| Matsakaicin tsayi (a.) | 33 | Nisa (a.) | 5 |
| Kauri (a.) | 0.55 | Radiant Heat Mai jituwa | No |
| Kasa da Daraja | Ee | Shigarwa | Mai iyo, Manne Kasa, Ƙashe Ƙashe, Ƙaƙƙarfan Ƙaƙwalwa |
| Takaddun shaida | KARB II | Kaurin Layer (mm) | 3 |
| Ƙarshen Sama | Bacin rai, Hannu | Garantin Kammala (a cikin shekaru) | shekaru 25 |
| Garanti na Tsarin (a cikin shekaru) | Shekaru 25 | Ƙasar Asalin | China |
| Girman Marufi (inci) | Tsayi: 4.75 Tsawo: 84 Nisa: 5 | Girman samfur | Tsayi: 9/16" Tsawon: 15 3/4 - 47 1/4" Nisa: 5" |
| Sqft / Akwati | 17.5 | Shawara 65 | Hankali mazauna California |
Menene injiniyan benayen katako?
Ƙwararren katako na injiniya yana dogara ne akan katako, Willow ko eucalyptus Multi-Layer, kuma saman tushe Layer ya zaɓi itacen itacen oak, gyada, Ash, Teak da sauran kayan a matsayin panel.Bayan ya shafa tare da manne na guduro, yana wucewa ta babban zafin jiki da matsa lamba a cikin latsa mai zafi Made.
Tsarin Samar da benaye:
Mataki na Farko:
Zaɓin nau'ikan itace da maki don madaidaicin madaidaicin, ƙirar da aka saba amfani da su sune eucalyptus mai tsabta, eucalyptus poplar, eucalyptus da Birch;B1 da B2
Mataki na biyu:
Juya log ɗin zuwa cikin kauri na 1.5mm kuma bai lalace ba, sannan bushe su
mataki na uku:
Domin tabbatar da ingancin ma'auni, dole ne a zaɓi ƙwararru kuma a rarraba su bisa ga kauri, launi, stuttering, lalacewa, da dai sauransu.
mataki na hudu:
Babban allo mai rufaffen manne: 8-10 yadudduka na katako mai kauri mai kauri mai kauri an shirya su a cikin tsari mai tsari kuma an haɗa su tare don canza ainihin madaidaiciyar alkiblar itace.
mataki na biyar:
Ta hanyar latsa mai zafi, ainihin allon da manne suna da cikakken haɗin gwiwa kuma an manna su.
Mataki na shida:
Kayan tushe yana yashi tare da ƙayyadaddun kauri.A saman da kasa na bene substrate suna sanded tare da kafaffen kauri sander don tabbatar da flatness da santsi na jirgin saman da kuma samar da wani muhimmin garanti ga haushi.
Mataki na bakwai:
Rarraba Substrate da adanar lafiya: Bayan yashi, bayan zaɓi da cire samfuran da ba su da lahani, samfuran da suka cancanta suna ba da izinin tsayawa na kwanaki 15-20 don sakin kuzarin madaidaicin madaidaicin kuma sanya ingancin ya fi tsayi.
Mataki na takwas:
Ana zabar katakon katako mai ƙarfi, ana rarraba shi gwargwadon matsayi, sa'an nan kuma ana daidaita abun ciki na danshi bisa ga yanayin.
Mataki na 9:
Manna ƙaƙƙarfan haushin itacen da aka yi da substrate tare da manne, sa'an nan kuma sanya su cikin latsa mai zafi don latsawa.
Mataki na goma:
Ci gaba da kiyaye lafiya na kwanaki 15-20 don sakin kuzari
Mataki na goma sha daya:
Yankewar bene da tsagi, duk na kowa sune T&G, Unilin, Valinge, Drop
Mataki na goma sha biyu:
Paint da marufi
Bayan cire ƙura, bene mai tsagi zai wuce ta kayan aikin fenti.Bayan marufi shida da manyan riguna uku, ana jera marufi.
Nau'in Zane
Danna Nau'in
T&G Injiniya Flooring
Unilin Injiniya Flooring
Nau'in Ƙarshe
Wuraren da aka goge da hannu
Wuraren Wuraren Ƙarƙashin Ƙarƙashin Ƙarƙashin Wuta
Ƙwararren Ƙwararren Ƙwararren Ƙasa
Babban darajar
Injin ABCD dabe
CDE injin daskarewa
ABC injin dabe
AB injiniyan dabe
Yadda Ake Bambance Makarantun Injiniya Injiniya
1. Bambance-bambancen Hanya
Darasi A:ba a yarda kulli;
Darasi B:Yawan kullin kowane pc: 1-3pcs da diamita na kullin wanda launinsa baƙar fata yana cikin 8mm da diamita na kullin wanda launi ya kusan daidai da veneer yana cikin 10mm;
Darasi C:Yawan kullin kowane pc: 1-3pcs da diamita na kullin wanda launinsa baƙar fata yana cikin 20mm da diamita na kullin wanda launi ya kusan daidai da veneer yana cikin 25mm;Bugu da kari, an ba da izinin 20% na farin gefen farar nisa kuma an yarda da bambancin launi;
Darasi D:Yawan kullin kowane pc: 1-3pcs da diamita na kullin wanda launinsa baƙar fata yana cikin 30mm da diamita na kullin wanda launi ya kusan daidai da veneer ba shi da iyaka;Bugu da ƙari, tsayin tsage yana cikin 30cm kuma an yarda da bambancin launi mai tsanani;
2.Kashi
Matsayin ABC:Kashi na AB: 15%, Kashi na C: 85%;
Darasi na ABCD:Kashi na AB: 20%, Kashi na C: 50%, Kashi na D: 30%
3.Hoto
Takaddun shaida
Tsarin Samfur
Kasuwar mu
Aikace-aikace
Aikin 1
Aikin 2
Yadda Ake Sanya Wuraren Katako Na Injiniya
MATAKI 1.
Tsaftace ƙasa, felu simintin da ke fitowa daga ƙasa, sannan a yi amfani da tsintsiya don tsaftace shi.Yashi da ciminti slurry a ƙasa dole ne a tsaftace su sosai, in ba haka ba zai yi rustle bayan shigarwa!
Bayani:
Za'a iya shimfiɗa bene kawai lokacin da danshi na ƙasa ya kasance ƙasa da 20, in ba haka ba, bene zai zama m da arched bayan kwanciya!
MATAKI NA 2.
Bayan an tsabtace ƙasa duka, yada fim ɗin filastik na bakin ciki, wanda ya kamata a rufe shi gaba ɗaya, kuma a haɗa haɗin gwiwa don raba ƙasa da ƙasa.
MATAKI NA 3.
Bayan shimfida fim ɗin filastik, sanya fim ɗin ciyawa na musamman a ƙasa.Hakanan ya kamata a daidaita shi kuma a shimfiɗa shi da ƙarfi.Zai fi kyau a sami mutane biyu su taimaka.
MATAKI NA 4.
Bayan ya shimfiɗa ciyawa, mai sakawa ya fitar da benaye da yawa daga cikin akwatin ya baje su duka a ƙasa, ya zaɓi bambancin launi, ya sanya babban bambancin launi a ƙarƙashin gado da kabad, ya shimfiɗa shi a kan fili mai launi iri ɗaya. bambanci.
MATAKI NA 5.
Fara shigarwa na yau da kullun na bene.Maigidan shigarwa yana yanke benaye ɗaya bayan ɗaya, sannan ya girka su kamar yadda aka nuna a cikin adadi mai zuwa.Yi amfani da guduma kawai don ƙarfafa tsakanin bene da ƙasa.Maigidan shigarwa yana da ƙwarewa sosai kuma saurin shigarwa yana da sauri sosai!Bar nisa na kusan 1 cm tsakanin bene da bango.
MATAKI NA 6.
Idan kasan ya yi tsayi da yawa, sanya shi a kan mai yankan ƙasa kuma yanke shi zuwa tsayin da ake bukata.Ba za a iya sanya injin yankan kai tsaye a kan fale-falen ƙasa ba.Domin kada a fasa ramin, sai a sanya kwali mai kauri a kasa.
MATAKI NA 7.
Gabaɗaya, shigar da bene ana aiwatar da shi ta hanyar mutane 2, jimlar kusan murabba'in murabba'in 35, kuma ya ɗauki awanni 6 kawai.
MATAKI NA 8.
Bayan an shigar da ƙasa, sanya maɓuɓɓugar ruwa tsakanin bene da bango.Ruwan bazara zai fadada kuma yayi kwangila tare da zafi.Yi amfani da kayan aikin ƙarfe na musamman don saka shi cikin rata.
MATAKI NA 9.
Don shigar da sutura, kana buƙatar gyara sutura a kan bango tare da ƙusoshi, da kuma rufe sutura da bango tare da gilashin gilashi.
MATAKI NA 10.
Kasa da siket duk an girka, kalar su har yanzu sun dace sosai, kuma sabon falon da aka girka shima yayi kyau sosai, don haka filin da aka girka ba shi da sauti.
Daban-daban Injiniya Daban Daban Ƙarƙashin katako, Hanyoyin Shigarwa
1.Classic Series Injiniya Flooring
2.Herringbone Series Injiniya Flooring
3.Chevron Series Injiniya Flooring
| Kariyar Wuta: | TS EN 13501-1 Dn s1 |
| Ƙarfafa Ƙarfafawa: | EN ISO 10456 da EN ISO 12664 Sakamakon 0.15 W / (mk) |
| Abubuwan Danshi: | TS EN 13183-1 Bukatun: 6% zuwa 9% Matsakaicin Sakamako: <7% |
| Ƙarfafa Ƙarfafawa: | EN ISO 10456 / EN ISO 12664 Sakamako 0.15 W / (mk) |
| Sakin Formaldehyde: | Darasi E1 |TS EN 717 - 1: 2006 Sakamakon 0.014 mg / m3 Bukatun: Kasa da 3 ppm Sakamakon: 0.0053 ppm |
| Juriya Zamewa: | Gwaji zuwa BS 7967-2: 2002 (Gwajin Pendulum a cikin ƙimar PTV) Sakamakon Ƙarshe mai mai: DRY (66) RASHIN RASHIN RISK (29) MATSAYI RISK Babu wani buƙatu na yanzu don jure juriya a cikin ci gaban zama. |
| Dacewar amfani: | Ya dace don amfani tare da dumama ƙasa a aikace-aikacen kasuwanci da na zama |
| Tasiri daga danshi: | Tsarin katako zai fadada idan an fallasa shi zuwa yanayin da ke ƙara yawan danshi fiye da 9%.Ƙarƙashin katako zai yi kwangila idan yanayin da ake ciki ya rage yawan danshin samfurin da ke ƙasa da 6%.Duk wani bayyanar da ke wajen waɗannan sigogi zai lalata aikin samfurin |
| Isar da Sauti: | Ƙarƙashin katako a kan kansa zai ba da taimako don rage sautin sauti, amma ginawa na dukan bene da kewaye da ke taimakawa wajen tasiri da sautin iska.Don ingantacciyar ƙima yakamata a ɗauki ƙwararren injiniya aiki don ƙididdige yadda ake samun ingantaccen sakamako. |
| Abubuwan thermal: | Ƙaƙƙarfan katako na katako yana ba da dabi'u masu zuwa: 20mm kauri allon tare da 4mm ko 6mm saman Layer zai rasa 0.10 K/Wm2 15mm allon tare da 4mm ko 6mm saman Layer zai rasa 0.08 K/Wm2 |
