3 Tsarin Injiniya Layer
Tsarin Injiniya Multilayer
Amfanin Falowar Injiniya
Ƙayyadaddun bayanai
Nau'in shimfida | An riga an gama | Nau'i | Maple/Hard Maple |
Launi | Brown | Inuwa | Inuwa Matsakaici/Matsakaici |
Nau'in Ƙarshe | Urethane | Matsayin sheki | Low-Gloss |
Aikace-aikace | Mazauni | Nau'in Core | Multi-Ply |
Bayanan martaba | Harshe & Tsagi | Nau'in Edge | Jinin Faransa |
Matsakaicin Tsawon (a.) | 48 | Mafi ƙarancin Tsawon (a.) | 20 |
Matsakaicin tsayi (a.) | 33 | Nisa (a.) | 5 |
Kauri (a.) | 0.55 | Radiant Heat Mai jituwa | No |
Kasa da Daraja | Ee | Shigarwa | Mai iyo, Manne Kasa, Ƙashe Ƙashe, Ƙaƙƙarfan Ƙaƙwalwa |
Takaddun shaida | KARB II | Kaurin Layer (mm) | 3 |
Ƙarshen Sama | Bacin rai, Hannu | Garantin Kammala (a cikin shekaru) | shekaru 25 |
Garanti na Tsarin (a cikin shekaru) | Shekaru 25 | Ƙasar Asalin | China |
Girman Marufi (inci) | Tsayi: 4.75 Tsawo: 84 Nisa: 5 | Girman samfur | Tsayi: 9/16" Tsawon: 15 3/4 - 47 1/4" Nisa: 5" |
Sqft / Akwati | 17.5 | Shawara 65 | Hankali mazauna California |
Menene fa'idar aikin shimfidar katako?
1. Kwanciyar hankali:
Saboda aikin shimfidar katako na injina yana amfani da yadudduka na itace masu sarƙaƙƙiya, yaduddukan suna iyakance ga junansu, kama da gidan tsuntsu.Wannan tsarin ya fi karko kuma yana da ɗan nakasu.Itace kanta tana da pores, wanda kuma zai iya kashe wasu fadadawa da raguwa.
2. Ta'aziyya: Tun da saman an yi shi da itace mai ƙarfi na halitta, yana da kyau a gani.A matsayin samfurin da ke haɗuwa da fata kai tsaye, tafiya akan shi kamar dai fata ta yi karo da juna ta fuskar taɓawa.A matsayin samfurin itace, zai iya daidaita yanayin zafi na cikin gida da zafi, kuma yana da halaye na dumi a cikin hunturu da sanyi a lokacin rani.
3. Dorewa:
Tare da ain foda UV fenti, da surface abrasion juriya, abrasion juriya, matsa lamba juriya da karce juriya na iya zama kwatankwacin da laminate bene, kuma babu bukatar sake fenti kowace shekara.
4. Sauƙi don shigarwa:
Yana da danna tsarin shimfidar katako, don haka babu buƙatar buga keel ɗin ƙasa lokacin shigarwa, zaku iya shigar da kanku.
Yadda za a kula da injin daskarewa?
1.Na fi tsoron fitowar rana.Idan hasken rana yana da ƙarfi sosai, Ina ba da shawarar ku har yanzu zana labule kuma kada ku ƙyale bene ya yi tsayayya da irin wannan haske mai ƙarfi, in ba haka ba bene zai fashe.
2. Mafi yawan tsoron karo da abubuwa masu wuya, kamar manyan sheqa.Zai fi kyau ku tuna canza silifas ɗinku lokacin shiga ɗakin
3.Kada a yi amfani da mop ɗin da ya jiƙa sosai, don haka dole ne mu murɗe shi a bushe, kuma kada a yi amfani da wanki ko ruwan sabulu don tsaftace shi lokacin da ake goge ƙasa.
4. Tsoron kumburi, idan ruwa ya zube a kasa, sai a yi amfani da auduga mai laushi wajen goge ruwan a wannan lokaci, sannan a bar shi ya bushe.Kada ku yi amfani da na'urar bushewa don bushewa.
5. Domin ci gaba da kallon bene, a yi amfani da su akai-akai.Tazarar kakin zuma gabaɗaya kusan shekara ɗaya ce.
Nau'in Zane
Danna Nau'in
T&G Injiniya Flooring
Unilin Injiniya Flooring
Nau'in Ƙarshe
Wuraren da aka goge da hannu
Wuraren Wuraren Ƙarƙashin Ƙarƙashin Ƙarƙashin Wuta
Ƙwararren Ƙwararren Ƙwararren Ƙasa
Babban darajar
Injin ABCD dabe
CDE injin daskarewa
ABC injin dabe
AB injiniyan dabe
Takaddun shaida
Tsarin Samfur
Kasuwar mu
Aikace-aikace
Aikin 1
Aikin 2
Yadda Ake Sanya Wuraren Katako Na Injiniya
MATAKI 1.
Tsaftace ƙasa, felu simintin da ke fitowa daga ƙasa, sannan a yi amfani da tsintsiya don tsaftace shi.Yashi da ciminti slurry a ƙasa dole ne a tsaftace su sosai, in ba haka ba zai yi rustle bayan shigarwa!
Bayani:
Za'a iya shimfiɗa bene kawai lokacin da danshi na ƙasa ya kasance ƙasa da 20, in ba haka ba, bene zai zama m da arched bayan kwanciya!
MATAKI NA 2.
Bayan an tsabtace ƙasa duka, yada fim ɗin filastik na bakin ciki, wanda ya kamata a rufe shi gaba ɗaya, kuma a haɗa haɗin gwiwa don raba ƙasa da ƙasa.
MATAKI NA 3.
Bayan shimfida fim ɗin filastik, sanya fim ɗin ciyawa na musamman a ƙasa.Hakanan ya kamata a daidaita shi kuma a shimfiɗa shi da ƙarfi.Zai fi kyau a sami mutane biyu su taimaka.
MATAKI NA 4.
Bayan ya shimfiɗa ciyawa, mai sakawa ya fitar da benaye da yawa daga cikin akwatin ya baje su duka a ƙasa, ya zaɓi bambancin launi, ya sanya babban bambancin launi a ƙarƙashin gado da kabad, ya shimfiɗa shi a kan fili mai launi iri ɗaya. bambanci.
MATAKI NA 5.
Fara shigarwa na yau da kullun na bene.Maigidan shigarwa yana yanke benaye ɗaya bayan ɗaya, sannan ya girka su kamar yadda aka nuna a cikin adadi mai zuwa.Yi amfani da guduma kawai don ƙarfafa tsakanin bene da ƙasa.Maigidan shigarwa yana da ƙwarewa sosai kuma saurin shigarwa yana da sauri sosai!Bar nisa na kusan 1 cm tsakanin bene da bango.
MATAKI NA 6.
Idan kasan ya yi tsayi da yawa, sanya shi a kan mai yankan ƙasa kuma yanke shi zuwa tsayin da ake bukata.Ba za a iya sanya injin yankan kai tsaye a kan fale-falen ƙasa ba.Domin kada a fasa ramin, sai a sanya kwali mai kauri a kasa.
MATAKI NA 7.
Gabaɗaya, shigar da bene ana aiwatar da shi ta hanyar mutane 2, jimlar kusan murabba'in murabba'in 35, kuma ya ɗauki awanni 6 kawai.
MATAKI NA 8.
Bayan an shigar da ƙasa, sanya maɓuɓɓugar ruwa tsakanin bene da bango.Ruwan bazara zai fadada kuma yayi kwangila tare da zafi.Yi amfani da kayan aikin ƙarfe na musamman don saka shi cikin rata.
MATAKI NA 9.
Don shigar da sutura, kana buƙatar gyara sutura a kan bango tare da ƙusoshi, da kuma rufe sutura da bango tare da gilashin gilashi.
MATAKI NA 10.
Kasa da siket duk an girka, kalar su har yanzu sun dace sosai, kuma sabon falon da aka girka shima yayi kyau sosai, don haka filin da aka girka ba shi da sauti.
Daban-daban Injiniya Daban Daban Ƙarƙashin katako, Hanyoyin Shigarwa
1.Classic Series Injiniya Flooring
2.Herringbone Series Injiniya Flooring
3.Chevron Series Injiniya Flooring
Kariyar Wuta: | TS EN 13501-1 Dn s1 |
Ƙarfafa Ƙarfafawa: | EN ISO 10456 da EN ISO 12664 Sakamakon 0.15 W / (mk) |
Abubuwan Danshi: | TS EN 13183-1 Bukatun: 6% zuwa 9% Matsakaicin Sakamako: <7% |
Ƙarfafa Ƙarfafawa: | EN ISO 10456 / EN ISO 12664 Sakamako 0.15 W / (mk) |
Sakin Formaldehyde: | Darasi E1 |TS EN 717 - 1: 2006 Sakamakon 0.014 mg / m3 Bukatun: Kasa da 3 ppm Sakamakon: 0.0053 ppm |
Juriya Zamewa: | Gwaji zuwa BS 7967-2: 2002 (Gwajin Pendulum a cikin ƙimar PTV) Sakamakon Ƙarshe mai mai: DRY (66) RASHIN RASHIN RISK (29) MATSAYI RISK Babu wani buƙatu na yanzu don jure juriya a cikin ci gaban zama. |
Dacewar amfani: | Ya dace don amfani tare da dumama ƙasa a aikace-aikacen kasuwanci da na zama |
Tasiri daga danshi: | Tsarin katako zai fadada idan an fallasa shi zuwa yanayin da ke ƙara yawan danshi fiye da 9%.Ƙarƙashin katako zai yi kwangila idan yanayin da ake ciki ya rage yawan danshin samfurin da ke ƙasa da 6%.Duk wani bayyanar da ke wajen waɗannan sigogi zai lalata aikin samfurin |
Isar da Sauti: | Ƙarƙashin katako a kan kansa zai ba da taimako don rage sautin sauti, amma ginawa na dukan bene da kewaye da ke taimakawa wajen tasiri da sautin iska.Don ingantacciyar ƙima yakamata a ɗauki ƙwararren injiniya aiki don ƙididdige yadda ake samun ingantaccen sakamako. |
Abubuwan thermal: | Ƙaƙƙarfan katako na katako yana ba da dabi'u masu zuwa: 20mm kauri allon tare da 4mm ko 6mm saman Layer zai rasa 0.10 K/Wm2 15mm allon tare da 4mm ko 6mm saman Layer zai rasa 0.08 K/Wm2 |